diff options
Diffstat (limited to 'doc/texinfo.tex')
| -rw-r--r-- | doc/texinfo.tex | 257 |
1 files changed, 166 insertions, 91 deletions
diff --git a/doc/texinfo.tex b/doc/texinfo.tex index 9cf29f2e..7506dffb 100644 --- a/doc/texinfo.tex +++ b/doc/texinfo.tex @@ -3,11 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2013-06-21.17} +\def\texinfoversion{2014-03-18.17} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, -% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc. +% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -281,9 +281,9 @@ \toks6=\expandafter{\prevsectiondefs}% \toks8=\expandafter{\lastcolordefs}% \mark{% - \the\toks0 \the\toks2 - \noexpand\or \the\toks4 \the\toks6 - \noexpand\else \the\toks8 + \the\toks0 \the\toks2 % 0: top marks (\last...) + \noexpand\or \the\toks4 \the\toks6 % 1: bottom marks (default, \prev...) + \noexpand\else \the\toks8 % 2: color marks }% } % \topmark doesn't work for the very first chapter (after the title @@ -322,10 +322,13 @@ % % Do this outside of the \shipout so @code etc. will be expanded in % the headline as they should be, not taken literally (outputting ''code). + \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars} + % \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi - \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% + \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}% + % \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi - \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% + \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}% % {% % Have to do this stuff outside the \shipout because we want it to @@ -1135,10 +1138,12 @@ output) for that.)} \ifpdf % - % Color manipulation macros based on pdfcolor.tex, + % Color manipulation macros using ideas from pdfcolor.tex, % except using rgb instead of cmyk; the latter is said to render as a % very dark gray on-screen and a very dark halftone in print, instead - % of actual black. + % of actual black. The dark red here is dark enough to print on paper as + % nearly black, but still distinguishable for online viewing. We use + % black by default, though. \def\rgbDarkRed{0.50 0.09 0.12} \def\rgbBlack{0 0 0} % @@ -1248,10 +1253,9 @@ output) for that.)} % used to mark target names; must be expandable. \def\pdfmkpgn#1{#1} % - % by default, use a color that is dark enough to print on paper as - % nearly black, but still distinguishable for online viewing. - \def\urlcolor{\rgbDarkRed} - \def\linkcolor{\rgbDarkRed} + % by default, use black for everything. + \def\urlcolor{\rgbBlack} + \def\linkcolor{\rgbBlack} \def\endlink{\setcolor{\maincolor}\pdfendlink} % % Adding outlines to PDF; macros for calculating structure of outlines @@ -2377,8 +2381,10 @@ end \ifx\next,% \else\ifx\next-% \else\ifx\next.% + \else\ifx\next\.% + \else\ifx\next\comma% \else\ptexslash - \fi\fi\fi + \fi\fi\fi\fi\fi \aftersmartic } @@ -2519,7 +2525,9 @@ end \ifx\codedashprev\codedash \else \discretionary{}{}{}\fi \fi - \global\let\codedashprev=\next + % we need the space after the = for the case when \next itself is a + % space token; it would get swallowed otherwise. As in @code{- a}. + \global\let\codedashprev= \next } } \def\normaldash{-} @@ -2567,37 +2575,21 @@ end \let\file=\code \let\option=\code -% @uref (abbreviation for `urlref') takes an optional (comma-separated) -% second argument specifying the text to display and an optional third -% arg as text to display instead of (rather than in addition to) the url -% itself. First (mandatory) arg is the url. -% (This \urefnobreak definition isn't used now, leaving it for a while -% for comparison.) -\def\urefnobreak#1{\dourefnobreak #1,,,\finish} -\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup - \unsepspaces - \pdfurl{#1}% - \setbox0 = \hbox{\ignorespaces #3}% - \ifdim\wd0 > 0pt - \unhbox0 % third arg given, show only that - \else - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0 > 0pt - \ifpdf - \unhbox0 % PDF: 2nd arg given, show only it - \else - \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url - \fi - \else - \code{#1}% only url given, so show it - \fi - \fi - \endlink -\endgroup} +% @uref (abbreviation for `urlref') aka @url takes an optional +% (comma-separated) second argument specifying the text to display and +% an optional third arg as text to display instead of (rather than in +% addition to) the url itself. First (mandatory) arg is the url. + +% TeX-only option to allow changing PDF output to show only the second +% arg (if given), and not the url (which is then just the link target). +\newif\ifurefurlonlylink -% This \urefbreak definition is the active one. +% The main macro is \urefbreak, which allows breaking at expected +% places within the url. (There used to be another version, which +% didn't support automatic breaking.) \def\urefbreak{\begingroup \urefcatcodes \dourefbreak} \let\uref=\urefbreak +% \def\dourefbreak#1{\urefbreakfinish #1,,,\finish} \def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example \unsepspaces @@ -2606,12 +2598,19 @@ end \ifdim\wd0 > 0pt \unhbox0 % third arg given, show only that \else - \setbox0 = \hbox{\ignorespaces #2}% + \setbox0 = \hbox{\ignorespaces #2}% look for second arg \ifdim\wd0 > 0pt \ifpdf - \unhbox0 % PDF: 2nd arg given, show only it + \ifurefurlonlylink + % PDF plus option to not display url, show just arg + \unhbox0 + \else + % PDF, normally display both arg and url for consistency, + % visibility, if the pdf is eventually used to print, etc. + \unhbox0\ (\urefcode{#1})% + \fi \else - \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url + \unhbox0\ (\urefcode{#1})% DVI, always show arg and url \fi \else \urefcode{#1}% only url given, so show it @@ -2651,8 +2650,10 @@ end % we put a little stretch before and after the breakable chars, to help % line breaking of long url's. The unequal skips make look better in % cmtt at least, especially for dots. -\def\urefprestretch{\urefprebreak \hskip0pt plus.13em } -\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em } +\def\urefprestretchamount{.13em} +\def\urefpoststretchamount{.1em} +\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax} +\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax} % \def\urefcodeamp{\urefprestretch \&\urefpoststretch} \def\urefcodedot{\urefprestretch .\urefpoststretch} @@ -2887,6 +2888,15 @@ end \def\inlinefmtname{#1}% \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi } +% +% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if +% FMTNAME is tex, else ELSE-TEXT. +\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish} +\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi +} +% % For raw, must switch into @tex before parsing the argument, to avoid % setting catcodes prematurely. Doing it this way means that, for % example, @inlineraw{html, foo{bar} gets a parse error instead of being @@ -2903,6 +2913,23 @@ end \endgroup % close group opened by \tex. } +% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set. +% +\long\def\inlineifset#1{\doinlineifset #1,\finish} +\long\def\doinlineifset#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax + \else\ignorespaces#2\fi +} + +% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set. +% +\long\def\inlineifclear#1{\doinlineifclear #1,\finish} +\long\def\doinlineifclear#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi +} + \message{glyphs,} % and logos. @@ -3658,7 +3685,7 @@ end \parskip=\smallskipamount \ifdim\parskip=0pt \parskip=2pt \fi % - % Try typesetting the item mark that if the document erroneously says + % Try typesetting the item mark so that if the document erroneously says % something like @itemize @samp (intending @table), there's an error % right away at the @itemize. It's not the best error message in the % world, but it's better than leaving it to the @item. This means if @@ -3908,19 +3935,23 @@ end } % multitable-only commands. -% -% @headitem starts a heading row, which we typeset in bold. -% Assignments have to be global since we are inside the implicit group -% of an alignment entry. \everycr resets \everytab so we don't have to +% +% @headitem starts a heading row, which we typeset in bold. Assignments +% have to be global since we are inside the implicit group of an +% alignment entry. \everycr below resets \everytab so we don't have to % undo it ourselves. \def\headitemfont{\b}% for people to use in the template row; not changeable \def\headitem{% \checkenv\multitable \crcr + \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings \global\everytab={\bf}% can't use \headitemfont since the parsing differs \the\everytab % for the first item }% % +% default for tables with no headings. +\let\headitemcrhook=\relax +% % A \tab used to include \hskip1sp. But then the space in a template % line is not enough. That is bad. So let's go back to just `&' until % we again encounter the problem the 1sp was intended to solve. @@ -3951,15 +3982,15 @@ end % \everycr = {% \noalign{% - \global\everytab={}% + \global\everytab={}% Reset from possible headitem. \global\colcount=0 % Reset the column counter. - % Check for saved footnotes, etc. + % + % Check for saved footnotes, etc.: \checkinserts - % Keeps underfull box messages off when table breaks over pages. - %\filbreak - % Maybe so, but it also creates really weird page breaks when the - % table breaks over pages. Wouldn't \vfil be better? Wait until the - % problem manifests itself, so it can be fixed for real --karl. + % + % Perhaps a \nobreak, then reset: + \headitemcrhook + \global\let\headitemcrhook=\relax }% }% % @@ -4198,7 +4229,7 @@ end \def\value{\begingroup\makevalueexpandable\valuexxx} \def\valuexxx#1{\expandablevalue{#1}\endgroup} { - \catcode`\- = \active \catcode`\_ = \active + \catcode`\-=\active \catcode`\_=\active % \gdef\makevalueexpandable{% \let\value = \expandablevalue @@ -4218,7 +4249,12 @@ end % variable's value contains other Texinfo commands, it's almost certain % it will fail (although perhaps we could fix that with sufficient work % to do a one-level expansion on the result, instead of complete). -% +% +% Unfortunately, this has the consequence that when _ is in the *value* +% of an @set, it does not print properly in the roman fonts (get the cmr +% dot accent at position 126 instead). No fix comes to mind, and it's +% been this way since 2003 or earlier, so just ignore it. +% \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax {[No value for ``#1'']}% @@ -4396,7 +4432,7 @@ end % complicated, when \tex is in effect and \{ is a \delimiter again. % We can't use \lbracecmd and \rbracecmd because texindex assumes % braces and backslashes are used only as delimiters. Perhaps we - % should define @lbrace and @rbrace commands a la @comma. + % should use @lbracechar and @rbracechar? \def\{{{\tt\char123}}% \def\}{{\tt\char125}}% % @@ -4417,8 +4453,7 @@ end % @end macro % ... % @funindex commtest - % - % The above is not enough to reproduce the bug, but it gives the flavor. + % This is not enough to reproduce the bug, but it gives the flavor. % % Sample whatsit resulting: % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} @@ -4619,8 +4654,21 @@ end \definedummyword\verb \definedummyword\w \definedummyword\xref + % + % Consider: + % @macro mkind{arg1,arg2} + % @cindex \arg2\ + % @end macro + % @mkind{foo, bar} + % The space after the comma will end up in the temporary definition + % that we make for arg2 (see \parsemargdef ff.). We want all this to be + % expanded for the sake of the index, so we end up just seeing "bar". + \let\xeatspaces = \eatspaces } +% For testing: output @{ and @} in index sort strings as \{ and \}. +\newif\ifusebracesinindexes + % \indexnofonts is used when outputting the strings to sort the index % by, and when constructing control sequence names. It eliminates all % control sequences and just writes whatever the best ASCII sort string @@ -4649,11 +4697,16 @@ end % Unfortunately, texindex is not prepared to handle braces in the % content at all. So for index sorting, we map @{ and @} to strings % starting with |, since that ASCII character is between ASCII { and }. - \def\{{|a}% - \def\lbracechar{|a}% + \ifusebracesinindexes + \def\lbracechar{\lbracecmd}% + \def\rbracechar{\rbracecmd}% + \else + \def\lbracechar{|a}% + \def\rbracechar{|b}% + \fi + \let\{=\lbracechar + \let\}=\rbracechar % - \def\}{|b}% - \def\rbracechar{|b}% % % Non-English letters. \def\AA{AA}% @@ -5905,7 +5958,7 @@ end % % Now the second mark, after the heading break. No break points % between here and the heading. - \let\prevsectiondefs=\lastsectiondefs + \global\let\prevsectiondefs=\lastsectiondefs \domark % % Only insert the space after the number if we have a section number. @@ -6272,8 +6325,8 @@ end \catcode `\|=\other \catcode `\<=\other \catcode `\>=\other - \catcode`\`=\other - \catcode`\'=\other + \catcode `\`=\other + \catcode `\'=\other \escapechar=`\\ % % ' is active in math mode (mathcode"8000). So reset it, and all our @@ -6297,7 +6350,7 @@ end \let\/=\ptexslash \let\*=\ptexstar \let\t=\ptext - \expandafter \let\csname top\endcsname=\ptextop % outer + \expandafter \let\csname top\endcsname=\ptextop % we've made it outer \let\frenchspacing=\plainfrenchspacing % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% @@ -6381,8 +6434,6 @@ end % side, and for 6pt waste from % each corner char, and rule thickness \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing = t% % % If this cartouche directly follows a sectioning command, we need the % \parskip glue (backspaced over by default) or the cartouche can @@ -6549,9 +6600,13 @@ end % @raggedright does more-or-less normal line breaking but no right -% justification. From plain.tex. +% justification. From plain.tex. Don't stretch around special +% characters in urls in this environment, since the stretch at the right +% should be enough. \envdef\raggedright{% - \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax + \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax + \def\urefprestretchamount{0pt}% + \def\urefpoststretchamount{0pt}% } \let\Eraggedright\par @@ -7444,7 +7499,7 @@ end % Parse the optional {params} list. Set up \paramno and \paramlist % so \defmacro knows what to do. Define \macarg.BLAH for each BLAH -% in the params list to some hook where the argument si to be expanded. If +% in the params list to some hook where the argument is to be expanded. If % there are less than 10 arguments that hook is to be replaced by ##N where N % is the position in that list, that is to say the macro arguments are to be % defined `a la TeX in the macro body. @@ -8306,6 +8361,7 @@ end \gdef\footnote{% \let\indent=\ptexindent \let\noindent=\ptexnoindent + % \global\advance\footnoteno by \@ne \edef\thisfootno{$^{\the\footnoteno}$}% % @@ -8329,6 +8385,11 @@ end % \gdef\dofootnote{% \insert\footins\bgroup + % + % Nested footnotes are not supported in TeX, that would take a lot + % more work. (\startsavinginserts does not suffice.) + \let\footnote=\errfootnote + % % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. @@ -8366,13 +8427,19 @@ end } }%end \catcode `\@=11 +\def\errfootnote{% + \errhelp=\EMsimple + \errmessage{Nested footnotes not supported in texinfo.tex, + even though they work in makeinfo; sorry} +} + % In case a @footnote appears in a vbox, save the footnote text and create % the real \insert just after the vbox finished. Otherwise, the insertion % would be lost. % Similarly, if a @footnote appears inside an alignment, save the footnote % text to a box and make the \insert when a row of the table is finished. % And the same can be done for other insert classes. --kasal, 16nov03. - +% % Replace the \insert primitive by a cheating macro. % Deeper inside, just make sure that the saved insertions are not spilled % out prematurely. @@ -9940,11 +10007,9 @@ directory should work if nowhere else does.} \catcode`\"=\active \def\activedoublequote{{\tt\char34}} \let"=\activedoublequote -\catcode`\~=\active -\def~{{\tt\char126}} +\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde \chardef\hat=`\^ -\catcode`\^=\active -\def^{{\tt \hat}} +\catcode`\^=\active \def\activehat{{\tt \hat}} \let^ = \activehat \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} @@ -9954,16 +10019,26 @@ directory should work if nowhere else does.} \catcode`\|=\active \def|{{\tt\char124}} + \chardef \less=`\< -\catcode`\<=\active -\def<{{\tt \less}} +\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless \chardef \gtr=`\> -\catcode`\>=\active -\def>{{\tt \gtr}} -\catcode`\+=\active -\def+{{\tt \char 43}} -\catcode`\$=\active -\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix +\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr +\catcode`\+=\active \def+{{\tt \char 43}} +\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix + +% used for headline/footline in the output routine, in case the page +% breaks in the middle of an @tex block. +\def\texinfochars{% + \let< = \activeless + \let> = \activegtr + \let~ = \activetilde + \let^ = \activehat + \markupsetuplqdefault \markupsetuprqdefault + \let\b = \strong + \let\i = \smartitalic + % in principle, all other definitions in \tex have to be undone too. +} % If a .fmt file is being used, characters that might appear in a file % name cannot be active until we have parsed the command line. |