diff options
Diffstat (limited to 'doc/gawktexi.in')
| -rw-r--r-- | doc/gawktexi.in | 99 |
1 files changed, 29 insertions, 70 deletions
diff --git a/doc/gawktexi.in b/doc/gawktexi.in index 6fdc67a3..e970d9a0 100644 --- a/doc/gawktexi.in +++ b/doc/gawktexi.in @@ -35,7 +35,7 @@ @c applies to and all the info about who's publishing this edition @c These apply across the board. -@set UPDATE-MONTH January, 2014 +@set UPDATE-MONTH February, 2014 @set VERSION 4.1 @set PATCHLEVEL 0 @@ -131,10 +131,7 @@ @ignore Some comments on the layout for TeX. -1. Use at least texinfo.tex 2000-09-06.09 -2. I have done A LOT of work to make this look good. There are `@page' commands - and use of `@group ... @end group' in a number of places. If you muck - with anything, it's your responsibility not to break the layout. +1. Use at least texinfo.tex 2014-01-30.15 @end ignore @c merge the function and variable indexes into the concept index @@ -2551,23 +2548,8 @@ Apr 21 70 74 514 @c endfile @end example -@ifinfo -If you are reading this in GNU Emacs using Info, you can copy the regions -of text showing these sample files into your own test files. This way you -can try out the examples shown in the remainder of this document. You do -this by using the command @kbd{M-x write-region} to copy text from the Info -file into a file for use with @command{awk} -(@xref{Misc File Ops, , Miscellaneous File Operations, emacs, GNU Emacs Manual}, -for more information). Using this information, create your own -@file{BBS-list} and @file{inventory-shipped} files and practice what you -learn in this @value{DOCUMENT}. - -@cindex Texinfo -If you are using the stand-alone version of Info, -see @ref{Extract Program}, -for an @command{awk} program that extracts these data files from -@file{gawk.texi}, the (generated) Texinfo source file for this Info file. -@end ifinfo +The sample files are included in the @command{gawk} distribution, +in the directory @file{awklib/eg/data}. @node Very Simple @section Some Simple Examples @@ -3064,7 +3046,7 @@ easier to maintain and usually run more efficiently. @node Invoking Gawk @chapter Running @command{awk} and @command{gawk} -This @value{CHAPTER} covers how to run awk, both POSIX-standard +This @value{CHAPTER} covers how to run @command{awk}, both POSIX-standard and @command{gawk}-specific command-line options, and what @command{awk} and @command{gawk} do with non-option arguments. @@ -3175,25 +3157,9 @@ Set the @code{FS} variable to @var{fs} Read @command{awk} program source from @var{source-file} instead of in the first non-option argument. This option may be given multiple times; the @command{awk} -program consists of the concatenation the contents of +program consists of the concatenation of the contents of each specified @var{source-file}. -@item -i @var{source-file} -@itemx --include @var{source-file} -@cindex @option{-i} option -@cindex @option{--include} option -@cindex @command{awk} programs, location of -Read @command{awk} source library from @var{source-file}. This option is -completely equivalent to using the @samp{@@include} directive inside -your program. This option is very -similar to the @option{-f} option, but there are two important differences. -First, when @option{-i} is used, the program source will not be loaded if it has -been previously loaded, whereas the @option{-f} will always load the file. -Second, because this option is intended to be used with code libraries, -@command{gawk} does not recognize such files as constituting main program -input. Thus, after processing an @option{-i} argument, @command{gawk} still expects to -find the main source code via the @option{-f} option or on the command-line. - @item -v @var{var}=@var{val} @itemx --assign @var{var}=@var{val} @cindex @option{-v} option @@ -3383,6 +3349,22 @@ for information about this option. Print a ``usage'' message summarizing the short and long style options that @command{gawk} accepts and then exit. +@item -i @var{source-file} +@itemx --include @var{source-file} +@cindex @option{-i} option +@cindex @option{--include} option +@cindex @command{awk} programs, location of +Read @command{awk} source library from @var{source-file}. This option is +completely equivalent to using the @samp{@@include} directive inside +your program. This option is very +similar to the @option{-f} option, but there are two important differences. +First, when @option{-i} is used, the program source will not be loaded if it has +been previously loaded, whereas the @option{-f} will always load the file. +Second, because this option is intended to be used with code libraries, +@command{gawk} does not recognize such files as constituting main program +input. Thus, after processing an @option{-i} argument, @command{gawk} still expects to +find the main source code via the @option{-f} option or on the command-line. + @item -l @var{lib} @itemx --load @var{lib} @cindex @code{-l} option @@ -6537,19 +6519,11 @@ will take effect. @node Constant Size @section Reading Fixed-Width Data -@ifnotinfo @quotation NOTE This @value{SECTION} discusses an advanced feature of @command{gawk}. If you are a novice @command{awk} user, you might want to skip it on the first reading. @end quotation -@end ifnotinfo - -@ifinfo -(This @value{SECTION} discusses an advanced feature of @command{awk}. -If you are a novice @command{awk} user, you might want to skip it on -the first reading.) -@end ifinfo @cindex data, fixed-width @cindex fixed-width data @@ -6679,19 +6653,11 @@ for an example of such a function). @node Splitting By Content @section Defining Fields By Content -@ifnotinfo @quotation NOTE This @value{SECTION} discusses an advanced feature of @command{gawk}. If you are a novice @command{awk} user, you might want to skip it on the first reading. @end quotation -@end ifnotinfo - -@ifinfo -(This @value{SECTION} discusses an advanced feature of @command{awk}. -If you are a novice @command{awk} user, you might want to skip it on -the first reading.) -@end ifinfo @cindex advanced features, specifying field content Normally, when using @code{FS}, @command{gawk} defines the fields as the @@ -13159,13 +13125,7 @@ The number of fields in the current input record. @code{NF} is set each time a new record is read, when a new field is created or when @code{$0} changes (@pxref{Fields}). -Unlike most of the variables described in this -@ifnotinfo -section, -@end ifnotinfo -@ifinfo -node, -@end ifinfo +Unlike most of the variables described in this @value{SUBSECTION}, assigning a value to @code{NF} has the potential to affect @command{awk}'s internal workings. In particular, assignments to @code{NF} can be used to create or remove fields from the @@ -22959,7 +22919,8 @@ printed and online documentation. @ifnotinfo Texinfo is fully documented in the book @cite{Texinfo---The GNU Documentation Format}, -available from the Free Software Foundation. +available from the Free Software Foundation, +and also available @uref{http://www.gnu.org/software/texinfo/manual/texinfo/, online}. @end ifnotinfo @ifinfo The Texinfo language is described fully, starting with @@ -28832,9 +28793,9 @@ certain fields in the API data structures unwritable from extension code, while allowing @command{gawk} to use them as it needs to. @item typedef enum awk_bool @{ -@item @ @ @ @ awk_false = 0, -@item @ @ @ @ awk_true -@item @} awk_bool_t; +@itemx @ @ @ @ awk_false = 0, +@itemx @ @ @ @ awk_true +@itemx @} awk_bool_t; A simple boolean type. @item typedef struct awk_string @{ @@ -35437,7 +35398,7 @@ for information on getting the latest version of @command{gawk}.) @item @ifnotinfo -Follow the @cite{GNU Coding Standards}. +Follow the @uref{http://www.gnu.org/prep/standards/, @cite{GNU Coding Standards}}. @end ifnotinfo @ifinfo See @inforef{Top, , Version, standards, GNU Coding Standards}. @@ -35596,11 +35557,9 @@ Be prepared to sign the appropriate paperwork. In order for the FSF to distribute your code, you must either place your code in the public domain and submit a signed statement to that effect, or assign the copyright in your code to the FSF. -@ifinfo Both of these actions are easy to do and @emph{many} people have done so already. If you have questions, please contact me, or @email{gnu@@gnu.org}. -@end ifinfo @item When doing a port, bear in mind that your code must coexist peacefully |