Finish infrastructure update.

5 files changed, 236 insertions, 104 deletions

diff --git a/config.guess b/config.guess
index d622a44e..aa04f04b 100755
--- a/config.guess
+++ b/config.guess
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
 #   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2012-02-10'
+timestamp='2012-06-17'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -200,6 +200,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -1256,7 +1260,7 @@ EOF
     NEO-?:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
diff --git a/config.sub b/config.sub
index c894da45..aa2cf19b 100755
--- a/config.sub
+++ b/config.sub
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
 #   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2012-02-10'
+timestamp='2012-06-17'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -225,6 +225,12 @@ case $os in
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -1346,7 +1352,7 @@ case $os in
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
@@ -1537,6 +1543,9 @@ case $basic_machine in
 	c4x-* | tic4x-*)
 		os=-coff
 		;;
+	hexagon-*)
+		os=-elf
+		;;
 	tic54x-*)
 		os=-coff
 		;;
diff --git a/depcomp b/depcomp
index debb6ffa..0544c683 100755
--- a/depcomp
+++ b/depcomp
@@ -1,7 +1,7 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2012-07-12.20; # UTC
 
 # Copyright (C) 1999-2012 Free Software Foundation, Inc.
 
@@ -334,6 +334,79 @@ icc)
   rm -f "$tmpdepfile"
   ;;
 
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  base=`echo "$source" | sed -e 's|^.*/||' -e 's/\.[-_a-zA-Z0-9]*$//'`
+  tmpdepfile="$base.d"
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir="$base.d-lock"
+  trap "echo '$0: caught signal, cleaning up...' >&2; rm -rf $lockdir" 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0 ; do
+    # mkdir is a portable test-and-set.
+    if mkdir $lockdir 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rm -rf $lockdir
+      break
+    else
+      ## the lock is being held by a different process,
+      ## wait until the winning process is done or we timeout
+      while test -d $lockdir && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
 hp2)
   # The "hp" stanza above does not work with aCC (C++) and HP's ia64
   # compilers, which have integrated preprocessors.  The correct option
diff --git a/doc/texinfo.tex b/doc/texinfo.tex
index e4dca02c..2b646dd6 100644
--- a/doc/texinfo.tex
+++ b/doc/texinfo.tex
@@ -3,7 +3,7 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2012-04-06.11}
+\def\texinfoversion{2012-07-03.16}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@@ -28,9 +28,9 @@
 %
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-%   ftp://tug.org/tex/texinfo.tex
-%     (and all CTAN mirrors, see http://www.ctan.org).
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
 % The texinfo.tex in any given distribution could well be out
 % of date, so if that's what you're using, please check.
 %
@@ -1117,7 +1117,7 @@ where each line of input produces a line of output.}
 % #1 is a control sequence in which to do the replacements,
 % which we \xdef.
 \def\txiescapepdf#1{%
-  \ifx\pdfescapestring\relax
+  \ifx\pdfescapestring\thisisundefined
     % No primitive available; should we give a warning or log?
     % Many times it won't matter.
   \else
@@ -1367,9 +1367,8 @@ output) for that.)}
   \def\skipspaces#1{\def\PP{#1}\def\D{|}%
     \ifx\PP\D\let\nextsp\relax
     \else\let\nextsp\skipspaces
-      \ifx\p\space\else\addtokens{\filename}{\PP}%
-        \advance\filenamelength by 1
-      \fi
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
     \fi
     \nextsp}
   \def\getfilename#1{%
@@ -1475,9 +1474,6 @@ output) for that.)}
 \def\ttsl{\setfontstyle{ttsl}}
 
 
-% Default leading.
-\newdimen\textleading  \textleading = 13.2pt
-
 % Set the baselineskip to #1, and the lineskip and strut size
 % correspondingly.  There is no deep meaning behind these magic numbers
 % used as factors; they just match (closely enough) what Knuth defined.
@@ -1489,6 +1485,7 @@ output) for that.)}
 % can get a sort of poor man's double spacing by redefining this.
 \def\baselinefactor{1}
 %
+\newdimen\textleading
 \def\setleading#1{%
   \dimen0 = #1\relax
   \normalbaselineskip = \baselinefactor\dimen0
@@ -1761,18 +1758,24 @@ end
 \fi\fi
 
 
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
+% Set the font macro #1 to the font named \fontprefix#2.
 % #3 is the font's design size, #4 is a scale factor, #5 is the CMap
-% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
-% empty to omit).
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
 \def\setfont#1#2#3#4#5{%
   \font#1=\fontprefix#2#3 scaled #4
   \csname cmap#5\endcsname#1%
 }
 % This is what gets called when #5 of \setfont is empty.
 \let\cmap\gobble
-% emacs-page end of cmaps
+%
+% (end of cmaps)
 
 % Use cm as the default font prefix.
 % To specify the font prefix, you must define \fontprefix
@@ -1782,7 +1785,7 @@ end
 \fi
 % Support font families that don't use the same naming scheme as CM.
 \def\rmshape{r}
-\def\rmbshape{bx}               %where the normal face is bold
+\def\rmbshape{bx}               % where the normal face is bold
 \def\bfshape{b}
 \def\bxshape{bx}
 \def\ttshape{tt}
@@ -1797,8 +1800,7 @@ end
 \def\scshape{csc}
 \def\scbshape{csc}
 
-% Definitions for a main text size of 11pt.  This is the default in
-% Texinfo.
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
 %
 \def\definetextfontsizexi{%
 % Text fonts (11.2pt, magstep1).
@@ -1923,7 +1925,7 @@ end
 \textleading = 13.2pt % line spacing for 11pt CM
 \textfonts            % reset the current fonts
 \rm
-} % end of 11pt text font size definitions
+} % end of 11pt text font size definitions, \definetextfontsizexi
 
 
 % Definitions to make the main text be 10pt Computer Modern, with
@@ -2055,7 +2057,7 @@ end
 \textleading = 12pt   % line spacing for 10pt CM
 \textfonts            % reset the current fonts
 \rm
-} % end of 10pt text font size definitions
+} % end of 10pt text font size definitions, \definetextfontsizex
 
 
 % We provide the user-level command
@@ -4204,7 +4206,7 @@ end
 }
 \def\ifsetfail{\doignore{ifset}}
 
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
 % defined with @set, or has been undefined with @clear.
 %
 % The `\else' inside the `\doifset' parameter is a trick to reuse the
@@ -4215,6 +4217,35 @@ end
 \def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
 \def\ifclearfail{\doignore{ifclear}}
 
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined.  We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+% 
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname #2\endcsname\relax
+      #1% If not defined, \let\next as above.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handlded similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
 % @dircategory CATEGORY  -- specify a category of the dir file
 % which this file should belong to.  Ignore this in TeX.
 \let\dircategory=\comment
diff --git a/ylwrap b/ylwrap
index 36543daa..7befa46d 100755
--- a/ylwrap
+++ b/ylwrap
@@ -1,7 +1,7 @@
 #! /bin/sh
 # ylwrap - wrapper for lex/yacc invocations.
 
-scriptversion=2011-08-25.18; # UTC
+scriptversion=2012-07-14.08; # UTC
 
 # Copyright (C) 1996-2012 Free Software Foundation, Inc.
 #
@@ -29,6 +29,37 @@ scriptversion=2011-08-25.18; # UTC
 # bugs to <bug-automake@gnu.org> or send patches to
 # <automake-patches@gnu.org>.
 
+get_dirname ()
+{
+  case $1 in
+    */*|*\\*) printf '%s\n' "$1" | sed -e 's|\([\\/]\)[^\\/]*$|\1|';;
+    # Otherwise,  we want the empty string (not ".").
+  esac
+}
+
+# guard FILE
+# ----------
+# The CPP macro used to guard inclusion of FILE.
+guard()
+{
+  printf '%s\n' "$from" \
+    | sed \
+        -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
+        -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'
+}
+
+# quote_for_sed [STRING]
+# ----------------------
+# Return STRING (or stdin) quoted to be used as a sed pattern.
+quote_for_sed ()
+{
+  case $# in
+    0) cat;;
+    1) printf '%s\n' "$1";;
+  esac \
+    | sed -e 's|[][\\.*]|\\&|g'
+}
+
 case "$1" in
   '')
     echo "$0: No files given.  Try '$0 --help' for more information." 1>&2
@@ -66,6 +97,8 @@ esac
 # The input.
 input="$1"
 shift
+# We'll later need for a correct munging of "#line" directives.
+input_sub_rx=`get_dirname "$input" | quote_for_sed`
 case "$input" in
   [\\/]* | ?:[\\/]*)
     # Absolute path; do nothing.
@@ -75,15 +108,40 @@ case "$input" in
     input="`pwd`/$input"
     ;;
 esac
+input_rx=`get_dirname "$input" | quote_for_sed`
+
+# Since DOS filename conventions don't allow two dots,
+# the DOS version of Bison writes out y_tab.c instead of y.tab.c
+# and y_tab.h instead of y.tab.h. Test to see if this is the case.
+y_tab_nodot=false
+if test -f y_tab.c || test -f y_tab.h; then
+  y_tab_nodot=true
+fi
 
-pairlist=
+# The parser itself, the first file, is the destination of the .y.c
+# rule in the Makefile.
+parser=$1
+# A sed program to s/FROM/TO/g for all the FROM/TO so that, for
+# instance, we rename #include "y.tab.h" into #include "parse.h"
+# during the conversion from y.tab.c to parse.c.
+rename_sed=
 while test "$#" -ne 0; do
   if test "$1" = "--"; then
     shift
     break
   fi
-  pairlist="$pairlist $1"
+  from=$1
+  # Handle y_tab.c and y_tab.h output by DOS
+  if $y_tab_nodot; then
+    case $from in
+      "y.tab.c") from=y_tab.c;;
+      "y.tab.h") from=y_tab.h;;
+    esac
+  fi
+  shift
+  to=$1
   shift
+  rename_sed="${rename_sed}s|"`quote_for_sed "$from"`"|$to|g;"
 done
 
 # The program to run.
@@ -114,98 +172,55 @@ esac
 ret=$?
 
 if test $ret -eq 0; then
-  set X $pairlist
-  shift
-  first=yes
-  # Since DOS filename conventions don't allow two dots,
-  # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-  # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-  y_tab_nodot="no"
-  if test -f y_tab.c || test -f y_tab.h; then
-    y_tab_nodot="yes"
-  fi
-
-  # The directory holding the input.
-  input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
-  # Quote $INPUT_DIR so we can use it in a regexp.
-  # FIXME: really we should care about more than '.' and '\'.
-  input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
-
-  while test "$#" -ne 0; do
-    from="$1"
-    # Handle y_tab.c and y_tab.h output by DOS
-    if test $y_tab_nodot = "yes"; then
-      if test $from = "y.tab.c"; then
-        from="y_tab.c"
-      else
-        if test $from = "y.tab.h"; then
-          from="y_tab.h"
-        fi
-      fi
-    fi
+  for from in *
+  do
+    to=`printf '%s\n' "$from" | sed "$rename_sed"`
     if test -f "$from"; then
       # If $2 is an absolute path name, then just use that,
       # otherwise prepend '../'.
-      case "$2" in
-        [\\/]* | ?:[\\/]*) target="$2";;
-        *) target="../$2";;
+      case $to in
+        [\\/]* | ?:[\\/]*) target=$to;;
+        *) target="../$to";;
       esac
 
-      # We do not want to overwrite a header file if it hasn't
-      # changed.  This avoid useless recompilations.  However the
-      # parser itself (the first file) should always be updated,
-      # because it is the destination of the .y.c rule in the
-      # Makefile.  Divert the output of all other files to a temporary
-      # file so we can compare them to existing versions.
-      if test $first = no; then
+      # Do not overwrite unchanged header files to avoid useless
+      # recompilations.  Always update the parser itself: it is the
+      # destination of the .y.c rule in the Makefile.  Divert the
+      # output of all other files to a temporary file so we can
+      # compare them to existing versions.
+      if test $from != $parser; then
         realtarget="$target"
-        target="tmp-`echo $target | sed s/.*[\\/]//g`"
+        target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'`
       fi
-      # Edit out '#line' or '#' directives.
-      #
-      # We don't want the resulting debug information to point at
-      # an absolute srcdir; it is better for it to just mention the
-      # .y file with no path.
-      #
-      # We want to use the real output file name, not yy.lex.c for
-      # instance.
-      #
-      # We want the include guards to be adjusted too.
-      FROM=`echo "$from" | sed \
-            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-            -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-      TARGET=`echo "$2" | sed \
-            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-            -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-
-      sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
-          -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
-
-      # Check whether header files must be updated.
-      if test $first = no; then
+
+      # Munge "#line" or "#" directives.  Don't let the resulting
+      # debug information point at an absolute srcdir.  Use the real
+      # output file name, not yy.lex.c for instance.  Adjust the
+      # include guards too.
+      FROM=`guard "$from"`
+      TARGET=`guard "$to"`
+      sed -e "/^#/!b" -e "s|$input_rx|$input_sub_rx|" -e "$rename_sed" \
+          -e "s|$FROM|$TARGET|" "$from" >"$target" || ret=$?
+
+      # Check whether files must be updated.
+      if test "$from" != "$parser"; then
         if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
-          echo "$2" is unchanged
+          echo "$to is unchanged"
           rm -f "$target"
         else
-          echo updating "$2"
+          echo "updating $to"
           mv -f "$target" "$realtarget"
         fi
       fi
     else
-      # A missing file is only an error for the first file.  This
-      # is a blatant hack to let us support using "yacc -d".  If -d
-      # is not specified, we don't want an error when the header
-      # file is "missing".
-      if test $first = yes; then
+      # A missing file is only an error for the parser.  This is a
+      # blatant hack to let us support using "yacc -d".  If -d is not
+      # specified, don't fail when the header file is "missing".
+      if test "$from" = "$parser"; then
         ret=1
       fi
     fi
-    shift
-    shift
-    first=no
   done
-else
-  ret=$?
 fi
 
 # Remove the directory.