diff options
Diffstat (limited to 'newlib/libc/machine/cris/sys')
-rw-r--r-- | newlib/libc/machine/cris/sys/errno.h | 177 | ||||
-rw-r--r-- | newlib/libc/machine/cris/sys/fcntl.h | 163 | ||||
-rw-r--r-- | newlib/libc/machine/cris/sys/signal.h | 89 |
3 files changed, 0 insertions, 429 deletions
diff --git a/newlib/libc/machine/cris/sys/errno.h b/newlib/libc/machine/cris/sys/errno.h deleted file mode 100644 index 310388943..000000000 --- a/newlib/libc/machine/cris/sys/errno.h +++ /dev/null @@ -1,177 +0,0 @@ -/* This file is to be kept in sync with newlib/libc/include/sys/errno.h - on which it is based, except values used or returned by syscalls must - be those of the Linux/CRIS kernel. */ - -/* errno is not a global variable, because that would make using it - non-reentrant. Instead, its address is returned by the function - __errno. */ - -#ifndef _SYS_ERRNO_H_ -#ifdef __cplusplus -extern "C" { -#endif -#define _SYS_ERRNO_H_ - -#include <sys/reent.h> - -#ifndef _REENT_ONLY -#define errno (*__errno()) -extern int *__errno _PARAMS ((void)); -#endif - -/* Please don't use these variables directly. - Use strerror instead. */ -extern _CONST char * _CONST _sys_errlist[]; -extern int _sys_nerr; - -#define __errno_r(ptr) ((ptr)->_errno) - -/* Adjusted to the linux asm/errno.h */ -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ - -#define EDEADLOCK EDEADLK - -#define EBFONT 59 /* Bad font file format */ -/* This is only used internally in newlib; not returned by the kernel. - EBFONT seems the closest match for a "bad file format" error. */ -#define EFTYPE EBFONT /* Inappropriate file type or format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ -#define ECANCELED 125 /* Operation Canceled */ -#define ENOKEY 126 /* Required key not available */ -#define EKEYEXPIRED 127 /* Key has expired */ -#define EKEYREVOKED 128 /* Key has been revoked */ -#define EKEYREJECTED 129 /* Key was rejected by service */ - -#define EOWNERDEAD 130 /* Owner died */ -#define ENOTRECOVERABLE 131 /* State not recoverable */ - -/* Widely known to be a synonym in Linux. */ -#define ENOTSUP EOPNOTSUPP - -#define __ELASTERROR 2000 /* Users can add values starting here */ - -#ifdef __cplusplus -} -#endif -#endif /* _SYS_ERRNO_H */ diff --git a/newlib/libc/machine/cris/sys/fcntl.h b/newlib/libc/machine/cris/sys/fcntl.h deleted file mode 100644 index 6017a190f..000000000 --- a/newlib/libc/machine/cris/sys/fcntl.h +++ /dev/null @@ -1,163 +0,0 @@ -/* This file is to be kept in sync with newlib/libc/include/sys/fcntl.h, - on which it is based, except values used or returned by syscalls must - be those of the Linux/CRIS kernel. */ - -#ifndef _FCNTL_ -#ifdef __cplusplus -extern "C" { -#endif -#define _FCNTL_ -#include <_ansi.h> -#define _FOPEN (-1) /* from sys/file.h, kernel use only */ -#define _FREAD 0x0001 /* read enabled */ -#define _FWRITE 0x0002 /* write enabled */ -#define _FNDELAY 0x0800 /* non blocking I/O (4.2 style) */ -#define _FAPPEND 0x0400 /* append (writes guaranteed at the end) */ -#define _FMARK 0x0010 /* internal; mark during gc() */ -#define _FDEFER 0x0020 /* internal; defer for next gc pass */ -#define _FASYNC 0x2000 /* signal pgrp when data ready */ -#define _FCREAT 0x0040 /* open with file create */ -#define _FTRUNC 0x0200 /* open with truncation */ -#define _FEXCL 0x0080 /* error on open if file exists */ -#define _FNBIO _FNONBLOCK /* non blocking I/O (sys5 style) */ -#define _FSYNC 0x1000 /* do all writes synchronously */ -#define _FNONBLOCK 0x0800 /* non blocking I/O (POSIX style) */ -#define _FNOCTTY 0x0100 /* don't assign a ctty on this open */ - -#define O_ACCMODE (O_RDONLY|O_WRONLY|O_RDWR) - -/* - * Flag values for open(2) and fcntl(2) - * The kernel adds 1 to the open modes to turn it into some - * combination of FREAD and FWRITE. - */ -#define O_RDONLY 0 /* +1 == FREAD */ -#define O_WRONLY 1 /* +1 == FWRITE */ -#define O_RDWR 2 /* +1 == FREAD|FWRITE */ -#define O_APPEND _FAPPEND -#define O_CREAT _FCREAT -#define O_TRUNC _FTRUNC -#define O_EXCL _FEXCL -/* O_SYNC _FSYNC not posix, defined below */ -/* O_NDELAY _FNDELAY set in include/fcntl.h */ -/* O_NDELAY _FNBIO set in 5include/fcntl.h */ -#define O_NONBLOCK _FNONBLOCK -#define O_NOCTTY _FNOCTTY - -#ifndef _POSIX_SOURCE - -#define O_SYNC _FSYNC - -/* - * Flags that work for fcntl(fd, F_SETFL, FXXXX) - */ -#define FAPPEND _FAPPEND -#define FSYNC _FSYNC -#define FASYNC _FASYNC -#define FNBIO _FNBIO -#define FNONBIO _FNONBLOCK /* XXX fix to be NONBLOCK everywhere */ -#define FNDELAY _FNDELAY - -/* - * Flags that are disallowed for fcntl's (FCNTLCANT); - * used for opens, internal state, or locking. - */ -#define FREAD _FREAD -#define FWRITE _FWRITE -#define FMARK _FMARK -#define FDEFER _FDEFER -#define FSHLOCK _FSHLOCK -#define FEXLOCK _FEXLOCK - -/* - * The rest of the flags, used only for opens - */ -#define FOPEN _FOPEN -#define FCREAT _FCREAT -#define FTRUNC _FTRUNC -#define FEXCL _FEXCL -#define FNOCTTY _FNOCTTY - -#endif /* !_POSIX_SOURCE */ - -/* XXX close on exec request; must match UF_EXCLOSE in user.h */ -#define FD_CLOEXEC 1 /* posix */ - -/* fcntl(2) requests */ -#define F_DUPFD 0 /* dup */ -#define F_GETFD 1 /* get f_flags */ -#define F_SETFD 2 /* set f_flags */ -#define F_GETFL 3 /* more flags (cloexec) */ -#define F_SETFL 4 -#define F_GETLK 5 -#define F_SETLK 6 -#define F_SETLKW 7 - -#define F_SETOWN 8 /* for sockets. */ -#define F_GETOWN 9 /* for sockets. */ - -/* for F_[GET|SET]FL */ -#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ - -/* for posix fcntl() and lockf() */ -#define F_RDLCK 0 -#define F_WRLCK 1 -#define F_UNLCK 2 - -/* for old implementation of bsd flock () */ -#define F_EXLCK 4 /* or 3 */ -#define F_SHLCK 8 /* or 4 */ - -/* operations for bsd flock(), also used by the kernel implementation */ -#define LOCK_SH 1 /* shared lock */ -#define LOCK_EX 2 /* exclusive lock */ -#define LOCK_NB 4 /* or'd with one of the above to prevent - blocking */ -#define LOCK_UN 8 /* remove lock */ - -/* file segment locking set data type - information passed to system by user */ -struct flock { - short l_type; /* F_RDLCK, F_WRLCK, or F_UNLCK */ - short l_whence; /* flag to choose starting offset */ - long l_start; /* relative offset, in bytes */ - long l_len; /* length, in bytes; 0 means lock to EOF */ - short l_pid; /* returned with F_GETLK */ - short l_xxx; /* reserved for future use */ -}; - -#ifndef _POSIX_SOURCE -/* extended file segment locking set data type */ -struct eflock { - short l_type; /* F_RDLCK, F_WRLCK, or F_UNLCK */ - short l_whence; /* flag to choose starting offset */ - long l_start; /* relative offset, in bytes */ - long l_len; /* length, in bytes; 0 means lock to EOF */ - short l_pid; /* returned with F_GETLK */ - short l_xxx; /* reserved for future use */ - long l_rpid; /* Remote process id wanting this lock */ - long l_rsys; /* Remote system id wanting this lock */ -}; -#endif /* !_POSIX_SOURCE */ - - -#include <sys/types.h> -#include <sys/stat.h> /* sigh. for the mode bits for open/creat */ - -extern int open _PARAMS ((const char *, int, ...)); -extern int creat _PARAMS ((const char *, mode_t)); -extern int fcntl _PARAMS ((int, int, ...)); - -/* Provide _<systemcall> prototypes for functions provided by some versions - of newlib. */ -#ifdef _COMPILING_NEWLIB -extern int _open _PARAMS ((const char *, int, ...)); -extern int _fcntl _PARAMS ((int, int, ...)); -#ifdef __LARGE64_FILES -extern int _open64 _PARAMS ((const char *, int, ...)); -#endif -#endif - -#ifdef __cplusplus -} -#endif -#endif /* !_FCNTL_ */ diff --git a/newlib/libc/machine/cris/sys/signal.h b/newlib/libc/machine/cris/sys/signal.h deleted file mode 100644 index 081a75fe9..000000000 --- a/newlib/libc/machine/cris/sys/signal.h +++ /dev/null @@ -1,89 +0,0 @@ -/* This file is to be kept in sync (well, reasonably so, it's quite - different) with newlib/libc/include/sys/signal.h on which it is - based, except values used or returned by syscalls must be those of - the Linux/CRIS kernel. */ - -/* sys/signal.h */ - -#ifndef _SYS_SIGNAL_H -#define _SYS_SIGNAL_H -#ifdef __cplusplus -extern "C" { -#endif - -#include "_ansi.h" - -typedef unsigned long sigset_t; - -/* Adjusted to linux, has unused sa_restorer field and unsigned long - sa_flags; relatively unimportant though. */ -/* Type of a signal handler. */ -typedef void (*__sighandler_t)(int); - -/* The type used in newlib sources. */ -typedef __sighandler_t _sig_func_ptr; - -struct sigaction { - __sighandler_t sa_handler; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -/* Adjusted to glibc; other values. */ -#define SA_NOCLDSTOP 1 /* only value supported now for sa_flags */ -#define SIG_SETMASK 2 /* set mask with sigprocmask() */ -#define SIG_BLOCK 0 /* set of signals to block */ -#define SIG_UNBLOCK 1 /* set of signals to, well, unblock */ - -/* These depend upon the type of sigset_t, which right now - is always a long.. They're in the POSIX namespace, but - are not ANSI. */ -#define sigaddset(what,sig) (*(what) |= (1<<(sig))) -#define sigemptyset(what) (*(what) = 0) - -int sigprocmask (int __how, const sigset_t *__a, sigset_t *__b); - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -#define SIGPWR 30 -#define NSIG 31 - -#ifdef __cplusplus -} -#endif -#ifndef _SIGNAL_H_ -/* Some applications take advantage of the fact that <sys/signal.h> - * and <signal.h> are equivalent in glibc. Allow for that here. */ -#include <signal.h> -#endif -#endif /* _SYS_SIGNAL_H */ |