diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 1357 |
1 files changed, 835 insertions, 522 deletions
@@ -12,8 +12,16 @@ ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help + --without-libbanshee Don't build with libbanshee" +ac_help="$ac_help --enable-libada Builds libada directory" ac_help="$ac_help + --with-gmp-dir=PATH Specify source directory for GMP library" +ac_help="$ac_help + --with-gmp=PATH Specify directory for installed GMP library" +ac_help="$ac_help + --enable-bootstrap Enable bootstrapping [no]" +ac_help="$ac_help --enable-serial-[{host,target,build}-]configure Force sequential configuration of sub-packages for the host, target or build @@ -40,6 +48,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -154,6 +163,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -324,6 +334,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -489,12 +504,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -581,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:585: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -602,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:606: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -620,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:624: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -675,7 +694,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:679: checking for a BSD compatible install" >&5 +echo "configure:698: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -727,57 +746,50 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' +echo $ac_n "checking whether ln works""... $ac_c" 1>&6 +echo "configure:751: checking whether ln works" >&5 +if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata_t +echo >conftestdata_f +if ln conftestdata_f conftestdata_t 2>/dev/null +then + acx_cv_prog_LN=ln +else + acx_cv_prog_LN=no +fi +rm -f conftestdata_f conftestdata_t -# Autoconf M4 include file defining utility macros for complex Canadian -# cross builds. - - - - - - -#### -# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM -# or AC_INIT. -# These demand that AC_CANONICAL_SYSTEM be called beforehand. - -#### -# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path]) -# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host. -# Code is pretty much lifted from autoconf2.53. - - - -#### -# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path]) -# Like AC_CHECK_TOOL, but requires the prefix if build!=host. - - - -#### -# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path]) -# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target. - - -### -# AC_PROG_CPP_WERROR -# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which -# triggers warnings from the preprocessor. Will be in autoconf 2.58. -# For now, using this also overrides header checks to use only the -# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a -# bit harder from here). -# Eventually autoconf will default to checking headers with the compiler -# instead, and we'll have to do this differently. - -# AC_PROG_CPP_WERROR - -# Test for GNAT. -# We require the gnatbind program, and a compiler driver that -# understands Ada. We use the user's CC setting, already found. -# -# Sets the shell variable have_gnat to yes or no as appropriate, and -# substitutes GNATBIND. +fi +if test $acx_cv_prog_LN = no; then + LN="cp" + echo "$ac_t""no, using $LN" 1>&6 +else + LN="$acx_cv_prog_LN" + echo "$ac_t""yes" 1>&6 +fi +echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +echo "configure:775: checking whether ln -s works" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata +if ln -s X conftestdata 2>/dev/null +then + rm -f conftestdata + ac_cv_prog_LN_S="ln -s" +else + ac_cv_prog_LN_S=ln +fi +fi +LN_S="$ac_cv_prog_LN_S" +if test "$ac_cv_prog_LN_S" = "ln -s"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi ### we might need to use some other shell than /bin/sh for running subshells @@ -876,9 +888,17 @@ fi # Double entries in build_configdirs, configdirs, or target_configdirs may # cause circular dependencies and break everything horribly. +# these library is used by various programs built for the build +# environment +# +build_libs="build-libiberty" + +# these tools are built for the build environment +build_tools="build-texinfo build-byacc build-flex build-bison build-m4" + # these libraries are used by various programs built for the host environment # -host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib" +host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib libbanshee libcpp" # these tools are built for the host environment # Note, the powerpc-eabi build depends on sim occurring before gdb in order to @@ -901,7 +921,8 @@ target_libraries="target-libiberty \ target-libgloss \ target-newlib \ target-libstdc++-v3 \ - target-libf2c \ + target-libmudflap \ + target-libgfortran \ ${libgcj} \ target-libobjc \ target-libada" @@ -922,20 +943,14 @@ target_tools="target-examples target-groff target-gperf target-rda" ## is important because configure will choke if they ever get through. ## ${configdirs} is directories we build using the host tools. ## ${target_configdirs} is directories we build using the target tools. -# configdirs=`echo ${host_libs} ${host_tools}` target_configdirs=`echo ${target_libraries} ${target_tools}` # Only make build modules if build != host. -# This should be done more generally, but at the moment it doesn't matter. if test ${host_alias} != ${build_alias} ; then - # This is the only build module. - build_modules=libiberty -else - build_modules= + build_configdirs=`echo ${build_libs} ${build_tools}` fi - ################################################################################ srcname="gnu development package" @@ -1080,6 +1095,22 @@ case "${host}" in ;; esac +# Check whether --with-libbanshee or --without-libbanshee was given. +if test "${with_libbanshee+set}" = set; then + withval="$with_libbanshee" + : +fi + +case ${with_libbanshee} in + no) + noconfigdirs="$noconfigdirs libbanshee" ;; + yes|"") + with_libbanshee=yes + ;; + *) + { echo "configure: error: --with-libbanshee can only be empty, "yes" or "no" (empty defaults to "yes"." 1>&2; exit 1; } +esac + # Check whether --enable-libada or --disable-libada was given. if test "${enable_libada+set}" = set; then enableval="$enable_libada" @@ -1108,6 +1139,18 @@ no) ;; esac + +# Allow --disable-libmudflap to exclude target-libmudflap +case $enable_libmudflap in +yes | "") + # By default it's enabled + ;; +no) + noconfigdirs="$noconfigdirs target-libmudflap" + ;; +esac + + case "${target}" in *-*-chorusos) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" @@ -1123,9 +1166,25 @@ case "${target}" in *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; + *-*-freebsd* | *-*-kfreebsd*-gnu) + noconfigdirs="$noconfigdirs target-newlib target-libgloss" + if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \ + && test -f /usr/local/include/gmp.h; then + with_gmp=/usr/local + fi + + # Skip some stuff that's unsupported on some FreeBSD configurations. + case "${target}" in + i*86-*-*) ;; + alpha*-*-*) ;; + *) + noconfigdirs="$noconfigdirs ${libgcj}" + ;; + esac + ;; *-*-kaos*) # Remove unsupported stuff on all kaOS configurations. - skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx" + skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx" skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf" skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib" noconfigdirs="$noconfigdirs target-libgloss" @@ -1148,12 +1207,6 @@ case "${target}" in ;; *-*-rtems*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" - case ${target} in - h8300*-*-* | h8500-*-*) - noconfigdirs="$noconfigdirs target-libf2c" - ;; - *) ;; - esac ;; *-*-uclinux*) noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}" @@ -1174,9 +1227,6 @@ case "${target}" in # newlib is not 64 bit ready noconfigdirs="$noconfigdirs target-newlib target-libgloss" ;; - alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu) - noconfigdirs="$noconfigdirs target-newlib target-libgloss" - ;; alpha*-*-*) # newlib is not 64 bit ready noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" @@ -1257,10 +1307,10 @@ case "${target}" in noconfigdirs="$noconfigdirs ${libgcj}" ;; h8300*-*-*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c" + noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; h8500-*-*) - noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c" + noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" ;; hppa*64*-*-linux* | parisc*64*-*-linux*) # In this case, it's because the hppa64-linux target is for @@ -1295,9 +1345,6 @@ case "${target}" in i[3456789]86-*-coff | i[3456789]86-*-elf) noconfigdirs="$noconfigdirs ${libgcj}" ;; - i[3456789]86-*-freebsd* | i[3456789]86-*-kfreebsd*-gnu) - noconfigdirs="$noconfigdirs target-newlib target-libgloss" - ;; i[3456789]86-*-linux*) # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's # not build java stuff by default. @@ -1331,8 +1378,13 @@ case "${target}" in *-*-cygwin*) target_configdirs="$target_configdirs target-libtermcap target-winsup" noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}" - # always build newlib. - skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` + # always build newlib if winsup directory is present. + if test -d "$srcdir/winsup" + then + skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` + else + echo "Warning: winsup is missing so newlib can't be built." + fi # Can't build gdb for Cygwin if not native. case "${host}" in @@ -1389,7 +1441,7 @@ case "${target}" in ;; powerpc-*-aix*) # copied from rs6000-*-* entry - noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe) target_configdirs="$target_configdirs target-winsup" @@ -1411,7 +1463,7 @@ case "${target}" in noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}" ;; rs6000-*-aix*) - noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; rs6000-*-*) noconfigdirs="$noconfigdirs gprof ${libgcj}" @@ -1420,8 +1472,7 @@ case "${target}" in noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}" ;; mips*-*-irix5*) - # The GNU linker does not support shared libraries. - noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; mips*-*-irix6*) # Linking libjava exceeds command-line length limits on at least @@ -1698,7 +1749,6 @@ if test "${build}" != "${host}" ; then # If we are doing a Canadian Cross, in which the host and build systems # are not the same, we set reasonable default values for the tools. - BISON=${BISON-bison} CC=${CC-${host_alias}-gcc} CFLAGS=${CFLAGS-"-g -O2"} CXX=${CXX-${host_alias}-c++} @@ -1708,49 +1758,9 @@ if test "${build}" != "${host}" ; then CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++} GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj} GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}} + BUILD_DIR_PREFIX=${build_subdir} BUILD_PREFIX=${build_alias}- BUILD_PREFIX_1=${build_alias}- - MAKEINFO=${MAKEINFO-makeinfo} - - if test -z "${YACC}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/bison; then - YACC="bison -y" - break - fi - if test -f $dir/byacc; then - YACC=byacc - break - fi - if test -f $dir/yacc; then - YACC=yacc - break - fi - done - IFS="$save_ifs" - if test -z "${YACC}" ; then - YACC="bison -y" - fi - fi - - if test -z "${LEX}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/flex; then - LEX=flex - break - fi - if test -f $dir/lex; then - LEX=lex - break - fi - done - IFS="$save_ifs" - LEX=${LEX-flex} - fi else # Set reasonable default values for some tools even if not Canadian. @@ -1761,100 +1771,16 @@ else # in Makefile.in, so can still be overridden by fragments. # This is all going to change when we autoconfiscate... - BISON="\$(USUAL_BISON)" CC_FOR_BUILD="\$(CC)" GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)" + BUILD_DIR_PREFIX= BUILD_PREFIX= BUILD_PREFIX_1=loser- - MAKEINFO="\$(USUAL_MAKEINFO)" - LEX="\$(USUAL_LEX)" - YACC="\$(USUAL_YACC)" - - # If CC is still not set, try to get gcc. - cc_prog_is_gcc= - if test -z "${CC}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/gcc; then - CC="gcc" - cc_prog_is_gcc=yes - echo 'void f(){}' > conftest.c - if test -z "`${CC} -g -c conftest.c 2>&1`"; then - CFLAGS=${CFLAGS-"-g -O2"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - else - CFLAGS=${CFLAGS-"-O2"} - CXXFLAGS=${CXXFLAGS-"-O2"} - fi - rm -f conftest* - break - fi - done - IFS="$save_ifs" - CC=${CC-cc} - else - # Determine if we are using gcc. - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF - if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then - cc_prog_is_gcc=yes - fi - rm -f conftest.c - if test -z "${CFLAGS}"; then - # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC - # is set to a version of gcc. - if test "$cc_prog_is_gcc" = yes; then - echo 'void f(){}' > conftest.c - if test -z "`${CC} -g -c conftest.c 2>&1`"; then - CFLAGS=${CFLAGS-"-g -O2"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - else - CFLAGS=${CFLAGS-"-O2"} - CXXFLAGS=${CXXFLAGS-"-O2"} - fi - rm -f conftest* - fi - fi - fi - # We must set the default linker to the linker used by gcc for the correct - # operation of libtool. If LD is not defined and we are using gcc, try to - # set the LD default to the ld used by gcc. - if test -z "$LD"; then - if test "$cc_prog_is_gcc" = yes; then - case $build in - *-*-mingw*) - gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; - *) - gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; - esac - case $gcc_prog_ld in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - LD="$gcc_prog_ld" ;; - esac - fi - fi - - CXX=${CXX-"c++"} - CFLAGS=${CFLAGS-"-g"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} -fi - -if test $host != $build; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Extract the first word of "gcc", so it can be a program name with args. + # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1858: checking for $ac_word" >&5 +echo "configure:1784: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1884,7 +1810,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1888: checking for $ac_word" >&5 +echo "configure:1814: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1935,7 +1861,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1939: checking for $ac_word" >&5 +echo "configure:1865: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1967,7 +1893,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1971: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1897: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1978,12 +1904,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1982 "configure" +#line 1908 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2009,12 +1935,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1939: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2018: checking whether we are using GNU C" >&5 +echo "configure:1944: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2023,7 +1949,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2042,7 +1968,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2046: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1972: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2074,11 +2000,42 @@ else fi + # We must set the default linker to the linker used by gcc for the correct + # operation of libtool. If LD is not defined and we are using gcc, try to + # set the LD default to the ld used by gcc. + if test -z "$LD"; then + if test "$GCC" = yes; then + case $build in + *-*-mingw*) + gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; + *) + gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; + esac + case $gcc_prog_ld in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + LD="$gcc_prog_ld" ;; + esac + fi + fi + + CXX=${CXX-"c++"} + CFLAGS=${CFLAGS-"-g"} + CXXFLAGS=${CXXFLAGS-"-g -O2"} +fi + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + + # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args. set dummy ${ac_tool_prefix}gnatbind; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2082: checking for $ac_word" >&5 +echo "configure:2039: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2110,7 +2067,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "gnatbind", so it can be a program name with args. set dummy gnatbind; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2114: checking for $ac_word" >&5 +echo "configure:2071: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2143,7 +2100,7 @@ fi fi echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6 -echo "configure:2147: checking whether compiler driver understands Ada" >&5 +echo "configure:2104: checking whether compiler driver understands Ada" >&5 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2156,8 +2113,11 @@ acx_cv_cc_gcc_supports_ada=no # has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1. # Therefore we must check for the error message as well as an # unsuccessful exit. +# Other compilers, like HP Tru64 UNIX cc, exit successfully when +# given a .adb file, but produce no object file. So we must check +# if an object file was really produced to guard against this. errors=`(${CC} -c conftest.adb) 2>&1 || echo failure` -if test x"$errors" = x; then +if test x"$errors" = x && test -f conftest.$ac_objext; then acx_cv_cc_gcc_supports_ada=yes break fi @@ -2166,12 +2126,140 @@ fi echo "$ac_t""$acx_cv_cc_gcc_supports_ada" 1>&6 -if test x$GNATBIND != xno && test x$acx_cv_gcc_supports_ada != xno; then +if test x$GNATBIND != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then have_gnat=yes else have_gnat=no fi +echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6 +echo "configure:2137: checking how to compare bootstrapped objects" >&5 +if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo abfoo >t1 + echo cdfoo >t2 + gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2' + if cmp t1 t2 2 2 > /dev/null 2>&1; then + if cmp t1 t2 1 1 > /dev/null 2>&1; then + : + else + gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16' + fi + fi + if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then + if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then + : + else + gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' + fi + fi + rm t1 t2 + +fi + +echo "$ac_t""$gcc_cv_prog_cmp_skip" 1>&6 +do_compare="$gcc_cv_prog_cmp_skip" + + + +# Check for GMP +gmplibs= +gmpinc= +have_gmp=yes +# Specify a location for gmp +# Check whether --with-gmp-dir or --without-gmp-dir was given. +if test "${with_gmp_dir+set}" = set; then + withval="$with_gmp_dir" + : +fi + + +if test "x$with_gmp_dir" != x && test -f "$with_gmp_dir/gmp.h"; then + gmpinc="-I$with_gmp_dir" + if test -f "$with_gmp_dir/.libs/libgmp.a"; then + gmplibs="$with_gmp_dir/.libs/libgmp.a" + elif test -f "$with_gmp_dir/_libs/libgmp.a"; then + gmplibs="$with_gmp_dir/_libs/libgmp.a" + fi + # One of the later tests will catch the error if neither library is present. +fi + +# Check whether --with-gmp or --without-gmp was given. +if test "${with_gmp+set}" = set; then + withval="$with_gmp" + : +fi + + +if test "x$with_gmp" != x && test -d "$with_gmp"; then + gmplibs="-L$with_gmp/lib -lgmp" + gmpinc="-I$with_gmp/include" +fi + +# Use system gmp if nothing else specified +if test "x$gmplibs" = x; then + gmplibs="-lgmp" +fi + +saved_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $gmpinc" +# Check GMP actually works +echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6 +echo "configure:2210: checking for correct version of gmp.h" >&5 +cat > conftest.$ac_ext <<EOF +#line 2212 "configure" +#include "confdefs.h" +#include "gmp.h" +int main() { + +#if __GNU_MP_VERSION < 3 +choke me +#endif + +; return 0; } +EOF +if { (eval echo configure:2223: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + echo "$ac_t""yes" 1>&6 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + echo "$ac_t""no" 1>&6; have_gmp=no +fi +rm -f conftest* + +if test x"$have_gmp" = xyes; then + echo $ac_n "checking for mpf_init in -lgmp""... $ac_c" 1>&6 +echo "configure:2236: checking for mpf_init in -lgmp" >&5 + + saved_LIBS="$LIBS" + LIBS="$LIBS $gmplibs" + cat > conftest.$ac_ext <<EOF +#line 2241 "configure" +#include "confdefs.h" +#include <gmp.h> +int main() { +mpf_t n; mpf_init(n); +; return 0; } +EOF +if { (eval echo configure:2248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + echo "$ac_t""yes" 1>&6 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + echo "$ac_t""no" 1>&6; have_gmp=no +fi +rm -f conftest* + LIBS="$saved_LIBS" + CFLAGS="$saved_CFLAGS" +fi + + + # By default, C is the only stage 1 language. stage1_languages=c @@ -2245,6 +2333,7 @@ if test -d ${srcdir}/gcc; then lang_dirs= boot_language= build_by_default= + need_gmp= . ${lang_frag} # This is quite sensitive to the ordering of the case statement arms. case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in @@ -2273,7 +2362,13 @@ if test -d ${srcdir}/gcc; then add_this_lang=no ;; esac - case $add_this_lang in + + # Disable language that need GMP if it isn't available. + if test x"$need_gmp" = xyes && test x"$have_gmp" = xno; then + add_this_lang=no + fi + + case $add_this_lang in no) # Remove language-dependent dirs. eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" @@ -2355,6 +2450,15 @@ fi # Quietly strip out all directories which aren't configurable in this tree. # This relies on all configurable subdirectories being autoconfiscated, which # is now the case. +build_configdirs_all="$build_configdirs" +build_configdirs= +for i in ${build_configdirs_all} ; do + j=`echo $i | sed -e s/build-//g` + if test -f ${srcdir}/$j/configure ; then + build_configdirs="${build_configdirs} $i" + fi +done + configdirs_all="$configdirs" configdirs= for i in ${configdirs_all} ; do @@ -2362,6 +2466,7 @@ for i in ${configdirs_all} ; do configdirs="${configdirs} $i" fi done + target_configdirs_all="$target_configdirs" target_configdirs= for i in ${target_configdirs_all} ; do @@ -2388,7 +2493,7 @@ if test -n "${notsupp}" && test -z "${norecursion}" ; then appdirs="" break fi - if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then + if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then appdirs="" break fi @@ -2574,6 +2679,9 @@ if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target- extra_host_args="$extra_host_args --with-newlib" fi +if test x${with_libbanshee} = xyes && echo " ${configdirs} " | grep " libbanshee " >/dev/null 2>&1; then + extra_host_args="$extra_host_args --with-libbanshee" +fi # Default to using --with-stabs for certain targets. if test x${with_stabs} = x ; then @@ -2600,113 +2708,219 @@ esac tooldir='${exec_prefix}'/${target_alias} build_tooldir=${tooldir} -# Generate default definitions for YACC, M4, LEX. These are used if the -# Makefile can't locate these programs in objdir. +# Generate default definitions for YACC, M4, LEX and other programs that run +# on the build machine. These are used if the Makefile can't locate these +# programs in objdir. MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing +for ac_prog in bison +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2721: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CONFIGURED_BISON"; then + ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CONFIGURED_BISON="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON" +if test -n "$CONFIGURED_BISON"; then + echo "$ac_t""$CONFIGURED_BISON" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$CONFIGURED_BISON" && break +done +test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison" + for ac_prog in 'bison -y' byacc yacc do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2612: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_YACC'+set}'`\" = set"; then +echo "configure:2756: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$DEFAULT_YACC"; then - ac_cv_prog_DEFAULT_YACC="$DEFAULT_YACC" # Let the user override the test. + if test -n "$CONFIGURED_YACC"; then + ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_DEFAULT_YACC="$ac_prog" + ac_cv_prog_CONFIGURED_YACC="$ac_prog" break fi done IFS="$ac_save_ifs" fi fi -DEFAULT_YACC="$ac_cv_prog_DEFAULT_YACC" -if test -n "$DEFAULT_YACC"; then - echo "$ac_t""$DEFAULT_YACC" 1>&6 +CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC" +if test -n "$CONFIGURED_YACC"; then + echo "$ac_t""$CONFIGURED_YACC" 1>&6 else echo "$ac_t""no" 1>&6 fi -test -n "$DEFAULT_YACC" && break +test -n "$CONFIGURED_YACC" && break done -test -n "$DEFAULT_YACC" || DEFAULT_YACC="$MISSING bison" +test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y" for ac_prog in gm4 gnum4 m4 do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2647: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_M4'+set}'`\" = set"; then +echo "configure:2791: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CONFIGURED_M4"; then + ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CONFIGURED_M4="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4" +if test -n "$CONFIGURED_M4"; then + echo "$ac_t""$CONFIGURED_M4" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$CONFIGURED_M4" && break +done +test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4" + +for ac_prog in flex +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2826: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$DEFAULT_M4"; then - ac_cv_prog_DEFAULT_M4="$DEFAULT_M4" # Let the user override the test. + if test -n "$CONFIGURED_FLEX"; then + ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_DEFAULT_M4="$ac_prog" + ac_cv_prog_CONFIGURED_FLEX="$ac_prog" break fi done IFS="$ac_save_ifs" fi fi -DEFAULT_M4="$ac_cv_prog_DEFAULT_M4" -if test -n "$DEFAULT_M4"; then - echo "$ac_t""$DEFAULT_M4" 1>&6 +CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX" +if test -n "$CONFIGURED_FLEX"; then + echo "$ac_t""$CONFIGURED_FLEX" 1>&6 else echo "$ac_t""no" 1>&6 fi -test -n "$DEFAULT_M4" && break +test -n "$CONFIGURED_FLEX" && break done -test -n "$DEFAULT_M4" || DEFAULT_M4="$MISSING m4" +test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex" for ac_prog in flex lex do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2682: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_LEX'+set}'`\" = set"; then +echo "configure:2861: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CONFIGURED_LEX"; then + ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CONFIGURED_LEX="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX" +if test -n "$CONFIGURED_LEX"; then + echo "$ac_t""$CONFIGURED_LEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$CONFIGURED_LEX" && break +done +test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex" + +for ac_prog in makeinfo +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2896: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$DEFAULT_LEX"; then - ac_cv_prog_DEFAULT_LEX="$DEFAULT_LEX" # Let the user override the test. + if test -n "$CONFIGURED_MAKEINFO"; then + ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_DEFAULT_LEX="$ac_prog" + ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog" break fi done IFS="$ac_save_ifs" fi fi -DEFAULT_LEX="$ac_cv_prog_DEFAULT_LEX" -if test -n "$DEFAULT_LEX"; then - echo "$ac_t""$DEFAULT_LEX" 1>&6 +CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO" +if test -n "$CONFIGURED_MAKEINFO"; then + echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6 else echo "$ac_t""no" 1>&6 fi -test -n "$DEFAULT_LEX" && break +test -n "$CONFIGURED_MAKEINFO" && break done -test -n "$DEFAULT_LEX" || DEFAULT_LEX="$MISSING flex" +test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo" # Create a .gdbinit file which runs the one in srcdir @@ -2790,17 +3004,7 @@ esac # Record target_configdirs and the configure arguments for target and # build configuration in Makefile. target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'` - -# This is the final value for target_configdirs. configdirs already -# has its final value, as does build_modules. It's time to create some -# lists of valid targets. - -all_build_modules= -configure_build_modules= -for module in ${build_modules} ; do - all_build_modules=all-build-${module} - configure_build_modules=configure-build-${module} -done +build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'` # Determine whether gdb needs tk/tcl or not. # Use 'maybe' since enable_gdbtk might be true even if tk isn't available @@ -2828,31 +3032,60 @@ case "$enable_gdbtk" in ;; esac -# Create the 'maybe dependencies'. This uses a temporary file. +# Strip out unwanted targets. # While at that, we remove Makefiles if we were started for recursive # configuration, so that the top-level Makefile reconfigures them, # like we used to do when configure itself was recursive. -rm -f maybedep.tmp -echo '# maybedep.tmp' > maybedep.tmp -# Make-targets which may need maybe dependencies. -mts="configure all install check clean distclean dvi info install-info" -mts="${mts} installcheck mostlyclean maintainer-clean TAGS" +# Loop over modules. $extrasub must be used with care, limiting as +# much as possible the usage of range addresses. That's because autoconf +# splits the sed script to overcome limits in the number of commands, +# and relying on carefully-timed sed passes may turn out to be very hard +# to maintain later. In this particular case, you just have to be careful +# not to nest @if/@endif pairs, because configure will not warn you at all. -# Loop over modules and make-targets. -for module in ${build_modules} ; do +# Check whether --enable-bootstrap or --disable-bootstrap was given. +if test "${enable_bootstrap+set}" = set; then + enableval="$enable_bootstrap" + : +else + enable_bootstrap=no +fi + +if test -d ${srcdir}/gcc; then + case "$host:$target:$enable_bootstrap" in + $build:$build:yes | *:no) ;; + *:yes) { echo "configure: error: cannot bootstrap a cross-compiler" 1>&2; exit 1; } ;; + *) { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; } ;; + esac +else + if test $enable_bootstrap = yes; then + { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } + fi +fi + +case "$enable_bootstrap" in + yes) + default_target=bootstrap + bootstrap_suffix=bootstrap ;; + no) + default_target=all + bootstrap_suffix=no-bootstrap ;; +esac + + +for module in ${build_configdirs} ; do if test -z "${no_recursion}" \ && test -f ${build_subdir}/${module}/Makefile; then echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure" rm -f ${build_subdir}/${module}/Makefile fi - for mt in ${mts} ; do - case ${mt} in - install) ;; # No installing build modules. - *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;; - esac - done + extrasub="$extrasub +/^@if build-$module\$/d +/^@endif build-$module\$/d +/^@if build-$module-$bootstrap_suffix\$/d +/^@endif build-$module-$bootstrap_suffix\$/d" done for module in ${configdirs} ; do if test -z "${no_recursion}" \ @@ -2860,9 +3093,11 @@ for module in ${configdirs} ; do echo 1>&2 "*** removing ${module}/Makefile to force reconfigure" rm -f ${module}/Makefile fi - for mt in ${mts} ; do - echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp - done + extrasub="$extrasub +/^@if $module\$/d +/^@endif $module\$/d +/^@if $module-$bootstrap_suffix\$/d +/^@endif $module-$bootstrap_suffix\$/d" done for module in ${target_configdirs} ; do if test -z "${no_recursion}" \ @@ -2870,12 +3105,15 @@ for module in ${target_configdirs} ; do echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure" rm -f ${target_subdir}/${module}/Makefile fi - for mt in ${mts} ; do - echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp - done + extrasub="$extrasub +/^@if target-$module\$/d +/^@endif target-$module\$/d +/^@if target-$module-$bootstrap_suffix\$/d +/^@endif target-$module-$bootstrap_suffix\$/d" done -maybe_dependencies=maybedep.tmp +extrasub="$extrasub +/^@if /,/^@endif /d" # Create the serialization dependencies. This uses a temporary file. @@ -2939,21 +3177,21 @@ serialization_dependencies=serdep.tmp # at the end of the argument list. # These will be expanded by make, so quote '$'. cat <<\EOF_SED > conftestsed -s/ --no[^ ]* / / -s/ --c[a-z-]*[= ][^ ]* / / -s/ --sr[a-z-]*[= ][^ ]* / / -s/ --ho[a-z-]*[= ][^ ]* / / -s/ --bu[a-z-]*[= ][^ ]* / / -s/ --t[a-z-]*[= ][^ ]* / / -s/ --program-[pst][a-z-]*[= ][^ ]* / / -s/ -cache-file[= ][^ ]* / / -s/ -srcdir[= ][^ ]* / / -s/ -host[= ][^ ]* / / -s/ -build[= ][^ ]* / / -s/ -target[= ][^ ]* / / -s/ -program-prefix[= ][^ ]* / / -s/ -program-suffix[= ][^ ]* / / -s/ -program-transform-name[= ][^ ]* / / +s/ --no[^ ]*/ /g +s/ --c[a-z-]*[= ][^ ]*//g +s/ --sr[a-z-]*[= ][^ ]*//g +s/ --ho[a-z-]*[= ][^ ]*//g +s/ --bu[a-z-]*[= ][^ ]*//g +s/ --t[a-z-]*[= ][^ ]*//g +s/ --program-[pst][a-z-]*[= ][^ ]*//g +s/ -cache-file[= ][^ ]*//g +s/ -srcdir[= ][^ ]*//g +s/ -host[= ][^ ]*//g +s/ -build[= ][^ ]*//g +s/ -target[= ][^ ]*//g +s/ -program-prefix[= ][^ ]*//g +s/ -program-suffix[= ][^ ]*//g +s/ -program-transform-name[= ][^ ]*//g s/ [^' -][^ ]* / / s/^ *//;s/ *$// s,\$,$$,g @@ -3141,6 +3379,20 @@ else fi GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)' +if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then + : +elif test -d ${srcdir}/gcc; then + GFORTRAN_FOR_TARGET='$$r/gcc/gfortran -B$$r/gcc/' +elif test "$host" = "$target"; then + GFORTRAN_FOR_TARGET='gfortran' +else + GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"` +fi +case $GFORTRAN_FOR_TARGET in +*' $(FLAGS_FOR_TARGET)') ;; +*) GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;; +esac + # Don't use libstdc++-v3's flags to configure/build itself. libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' @@ -3182,6 +3434,7 @@ qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'` # Wrap CC_FOR_TARGET and friends, for certain types of builds. CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}" GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}" +GFORTRAN_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GFORTRAN_FOR_TARGET}" CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}" RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}" CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}" @@ -3210,8 +3463,8 @@ ospace_frag=${srcdir}/${ospace_frag} -# Build module lists & subconfigure args. +# Build module lists & subconfigure args. @@ -3227,10 +3480,6 @@ ospace_frag=${srcdir}/${ospace_frag} - - - - # Host tools. ncn_tool_prefix= test -n "$host_alias" && ncn_tool_prefix=$host_alias- @@ -3241,7 +3490,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3245: checking for $ac_word" >&5 +echo "configure:3494: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3274,7 +3523,7 @@ if test -z "$ac_cv_prog_AR" ; then # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3278: checking for $ac_word" >&5 +echo "configure:3527: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3313,7 +3562,7 @@ fi # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3317: checking for $ac_word" >&5 +echo "configure:3566: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3346,7 +3595,7 @@ if test -z "$ac_cv_prog_AS" ; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3350: checking for $ac_word" >&5 +echo "configure:3599: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3385,7 +3634,7 @@ fi # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3389: checking for $ac_word" >&5 +echo "configure:3638: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3418,7 +3667,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3422: checking for $ac_word" >&5 +echo "configure:3671: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3457,7 +3706,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3461: checking for $ac_word" >&5 +echo "configure:3710: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3490,7 +3739,7 @@ if test -z "$ac_cv_prog_LD" ; then # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3494: checking for $ac_word" >&5 +echo "configure:3743: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3529,7 +3778,7 @@ fi # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3533: checking for $ac_word" >&5 +echo "configure:3782: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3562,7 +3811,7 @@ if test -z "$ac_cv_prog_NM" ; then # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3566: checking for $ac_word" >&5 +echo "configure:3815: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3601,7 +3850,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3605: checking for $ac_word" >&5 +echo "configure:3854: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3634,7 +3883,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3638: checking for $ac_word" >&5 +echo "configure:3887: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3673,7 +3922,7 @@ fi # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3677: checking for $ac_word" >&5 +echo "configure:3926: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3706,7 +3955,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3710: checking for $ac_word" >&5 +echo "configure:3959: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3745,7 +3994,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args. set dummy ${ncn_tool_prefix}objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3749: checking for $ac_word" >&5 +echo "configure:3998: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3778,7 +4027,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then # Extract the first word of "objcopy", so it can be a program name with args. set dummy objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3782: checking for $ac_word" >&5 +echo "configure:4031: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3817,7 +4066,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args. set dummy ${ncn_tool_prefix}objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3821: checking for $ac_word" >&5 +echo "configure:4070: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3850,7 +4099,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3854: checking for $ac_word" >&5 +echo "configure:4103: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3891,512 +4140,509 @@ fi - - - # Target tools. if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3903: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4149: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$AR_FOR_TARGET"; then - ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_AR_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_AR_FOR_TARGET="$CONFIGURED_AR_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}ar" + ac_cv_prog_CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar" break fi done IFS="$ac_save_ifs" fi fi -AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET" -if test -n "$AR_FOR_TARGET"; then - echo "$ac_t""$AR_FOR_TARGET" 1>&6 +CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" +if test -n "$CONFIGURED_AR_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_AR_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET + ncn_cv_CONFIGURED_AR_FOR_TARGET=$CONFIGURED_AR_FOR_TARGET # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3936: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4182: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_AR_FOR_TARGET"; then - ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="$ncn_cv_CONFIGURED_AR_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar" + ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar" fi fi -ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET" -if test -n "$ncn_cv_AR_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_AR_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET + CONFIGURED_AR_FOR_TARGET=$ncn_cv_CONFIGURED_AR_FOR_TARGET else - AR_FOR_TARGET="${ncn_target_tool_prefix}ar" + CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar" fi else - AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET" + CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3975: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4221: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$AS_FOR_TARGET"; then - ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_AS_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_AS_FOR_TARGET="$CONFIGURED_AS_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}as" + ac_cv_prog_CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as" break fi done IFS="$ac_save_ifs" fi fi -AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET" -if test -n "$AS_FOR_TARGET"; then - echo "$ac_t""$AS_FOR_TARGET" 1>&6 +CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" +if test -n "$CONFIGURED_AS_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_AS_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET + ncn_cv_CONFIGURED_AS_FOR_TARGET=$CONFIGURED_AS_FOR_TARGET # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4008: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4254: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_AS_FOR_TARGET"; then - ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="$ncn_cv_CONFIGURED_AS_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_AS_FOR_TARGET="as" + ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as" fi fi -ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET" -if test -n "$ncn_cv_AS_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_AS_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET + CONFIGURED_AS_FOR_TARGET=$ncn_cv_CONFIGURED_AS_FOR_TARGET else - AS_FOR_TARGET="${ncn_target_tool_prefix}as" + CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as" fi else - AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET" + CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4047: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4293: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$DLLTOOL_FOR_TARGET"; then - ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="$CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" + ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" break fi done IFS="$ac_save_ifs" fi fi -DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET" -if test -n "$DLLTOOL_FOR_TARGET"; then - echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6 +CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" +if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET + ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET=$CONFIGURED_DLLTOOL_FOR_TARGET # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4080: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4326: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then - ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool" + ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool" fi fi -ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" -if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET + CONFIGURED_DLLTOOL_FOR_TARGET=$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET else - DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" + CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" fi else - DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET" + CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4119: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4365: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$LD_FOR_TARGET"; then - ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_LD_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_LD_FOR_TARGET="$CONFIGURED_LD_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}ld" + ac_cv_prog_CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld" break fi done IFS="$ac_save_ifs" fi fi -LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET" -if test -n "$LD_FOR_TARGET"; then - echo "$ac_t""$LD_FOR_TARGET" 1>&6 +CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" +if test -n "$CONFIGURED_LD_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_LD_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET + ncn_cv_CONFIGURED_LD_FOR_TARGET=$CONFIGURED_LD_FOR_TARGET # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4152: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4398: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_LD_FOR_TARGET"; then - ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="$ncn_cv_CONFIGURED_LD_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld" + ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld" fi fi -ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET" -if test -n "$ncn_cv_LD_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_LD_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET + CONFIGURED_LD_FOR_TARGET=$ncn_cv_CONFIGURED_LD_FOR_TARGET else - LD_FOR_TARGET="${ncn_target_tool_prefix}ld" + CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld" fi else - LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET" + CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4191: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4437: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$NM_FOR_TARGET"; then - ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_NM_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_NM_FOR_TARGET="$CONFIGURED_NM_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}nm" + ac_cv_prog_CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm" break fi done IFS="$ac_save_ifs" fi fi -NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET" -if test -n "$NM_FOR_TARGET"; then - echo "$ac_t""$NM_FOR_TARGET" 1>&6 +CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" +if test -n "$CONFIGURED_NM_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_NM_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET + ncn_cv_CONFIGURED_NM_FOR_TARGET=$CONFIGURED_NM_FOR_TARGET # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4224: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4470: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_NM_FOR_TARGET"; then - ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="$ncn_cv_CONFIGURED_NM_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm" + ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm" fi fi -ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET" -if test -n "$ncn_cv_NM_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_NM_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET + CONFIGURED_NM_FOR_TARGET=$ncn_cv_CONFIGURED_NM_FOR_TARGET else - NM_FOR_TARGET="${ncn_target_tool_prefix}nm" + CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm" fi else - NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET" + CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4263: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4509: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$RANLIB_FOR_TARGET"; then - ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="$CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib" + ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib" break fi done IFS="$ac_save_ifs" fi fi -RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET" -if test -n "$RANLIB_FOR_TARGET"; then - echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6 +CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" +if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_RANLIB_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET + ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=$CONFIGURED_RANLIB_FOR_TARGET # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4296: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4542: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then - ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib" + ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="ranlib" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=":" fi fi -ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" -if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET + CONFIGURED_RANLIB_FOR_TARGET=$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET else - RANLIB_FOR_TARGET=":" + CONFIGURED_RANLIB_FOR_TARGET=":" fi else - RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET" + CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4335: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4581: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$WINDRES_FOR_TARGET"; then - ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="$CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" + ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" break fi done IFS="$ac_save_ifs" fi fi -WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET" -if test -n "$WINDRES_FOR_TARGET"; then - echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6 +CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" +if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_WINDRES_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET + ncn_cv_CONFIGURED_WINDRES_FOR_TARGET=$CONFIGURED_WINDRES_FOR_TARGET # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4368: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4614: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then - ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres" + ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres" fi fi -ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" -if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET + CONFIGURED_WINDRES_FOR_TARGET=$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET else - WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" + CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" fi else - WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET" + CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" fi @@ -4409,6 +4655,7 @@ fi + # Fix up target tools. if test "x${build}" = "x${host}" ; then # In this case, the newly built tools can and should be used, @@ -4424,14 +4671,31 @@ if test "x${build}" = "x${host}" ; then NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)" RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)" WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)" +else + # Just use the ones we found. + AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)" + AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)" + DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)" + LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)" + NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)" + RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)" + WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)" fi + + + + + + + + # Certain tools may need extra flags. AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target} RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4435: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4699: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4474,6 +4738,42 @@ case $build in esac +# It makes debugging easier if we create as symlinks the stage directories +# gcc for stageN-gcc and stage-prev for stage(N-1). In case this is not +# possible, however, we can resort to mv. +echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6 +echo "configure:4746: checking if symbolic links between directories work" >&5 +if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "${LN_S}" = "ln -s" \ + && mkdir confdir.s1 \ + && ln -s confdir.s1 confdir.s2 \ + && echo timestamp1 > confdir.s1/conftest.1 \ + && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \ + && echo timestamp2 > confdir.s2/conftest.2 \ + && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \ + && rm -f confdir.s2; then + gcc_cv_prog_ln_s_dir=yes +else + gcc_cv_prog_ln_s_dir=yes +fi +rm -rf confdir.s1 confdir.s2 +fi + +echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6 + +case ${gcc_cv_prog_ln_s_dir} in + yes) + CREATE_LINK_TO_DIR='ln -s $$1 $$2' + UNDO_LINK_TO_DIR='rm -f $$1' ;; + *) + CREATE_LINK_TO_DIR='mv $$1 $$2' + UNDO_LINK_TO_DIR='mv $$1 $$2' ;; +esac + + + # Enable -Werror in bootstrap stage2 and later. # Change the default to "no" on release branches. # Check whether --enable-werror or --disable-werror was given. @@ -4484,9 +4784,9 @@ else enable_werror=yes fi -case ${enable_error} in - yes) WERROR=-Werror ;; - *) WERROR= ;; +case ${enable_werror} in + yes) stage2_werror_flag="--enable-werror-always" ;; + *) stage2_werror_flag="" ;; esac @@ -4653,18 +4953,25 @@ s%@build_os@%$build_os%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@LN@%$LN%g +s%@LN_S@%$LN_S%g s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g s%@build_subdir@%$build_subdir%g s%@host_subdir@%$host_subdir%g s%@target_subdir@%$target_subdir%g s%@CC@%$CC%g s%@GNATBIND@%$GNATBIND%g +s%@do_compare@%$do_compare%g +s%@gmplibs@%$gmplibs%g +s%@gmpinc@%$gmpinc%g s%@stage1_languages@%$stage1_languages%g -s%@DEFAULT_YACC@%$DEFAULT_YACC%g -s%@DEFAULT_M4@%$DEFAULT_M4%g -s%@DEFAULT_LEX@%$DEFAULT_LEX%g -/@maybe_dependencies@/r $maybe_dependencies -s%@maybe_dependencies@%%g +s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g +s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g +s%@CONFIGURED_M4@%$CONFIGURED_M4%g +s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g +s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g +s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g +s%@default_target@%$default_target%g /@serialization_dependencies@/r $serialization_dependencies s%@serialization_dependencies@%%g /@host_makefile_frag@/r $host_makefile_frag @@ -4677,6 +4984,7 @@ s%@alphaieee_frag@%%g s%@ospace_frag@%%g s%@SET_LIB_PATH@%$SET_LIB_PATH%g s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g +s%@BUILD_DIR_PREFIX@%$BUILD_DIR_PREFIX%g s%@BUILD_PREFIX@%$BUILD_PREFIX%g s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g s%@gcc_version_trigger@%$gcc_version_trigger%g @@ -4687,17 +4995,12 @@ s%@GDB_TK@%$GDB_TK%g s%@gxx_include_dir@%$gxx_include_dir%g s%@libstdcxx_incdir@%$libstdcxx_incdir%g s%@build_configargs@%$build_configargs%g -s%@configure_build_modules@%$configure_build_modules%g -s%@all_build_modules@%$all_build_modules%g +s%@build_configdirs@%$build_configdirs%g s%@host_configargs@%$host_configargs%g s%@configdirs@%$configdirs%g s%@target_configargs@%$target_configargs%g s%@target_configdirs@%$target_configdirs%g -s%@BISON@%$BISON%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g -s%@LEX@%$LEX%g -s%@MAKEINFO@%$MAKEINFO%g -s%@YACC@%$YACC%g s%@config_shell@%$config_shell%g s%@AR@%$AR%g s%@ncn_cv_AR@%$ncn_cv_AR%g @@ -4719,33 +5022,43 @@ s%@OBJDUMP@%$OBJDUMP%g s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g s%@CXX@%$CXX%g s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g -s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g -s%@ncn_cv_AR_FOR_TARGET@%$ncn_cv_AR_FOR_TARGET%g -s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g -s%@ncn_cv_AS_FOR_TARGET@%$ncn_cv_AS_FOR_TARGET%g -s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g -s%@ncn_cv_DLLTOOL_FOR_TARGET@%$ncn_cv_DLLTOOL_FOR_TARGET%g -s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g -s%@ncn_cv_LD_FOR_TARGET@%$ncn_cv_LD_FOR_TARGET%g -s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g -s%@ncn_cv_NM_FOR_TARGET@%$ncn_cv_NM_FOR_TARGET%g -s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g -s%@ncn_cv_RANLIB_FOR_TARGET@%$ncn_cv_RANLIB_FOR_TARGET%g -s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g -s%@ncn_cv_WINDRES_FOR_TARGET@%$ncn_cv_WINDRES_FOR_TARGET%g +s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_AR_FOR_TARGET@%$ncn_cv_CONFIGURED_AR_FOR_TARGET%g +s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_AS_FOR_TARGET@%$ncn_cv_CONFIGURED_AS_FOR_TARGET%g +s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET@%$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET%g +s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_LD_FOR_TARGET@%$ncn_cv_CONFIGURED_LD_FOR_TARGET%g +s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_NM_FOR_TARGET@%$ncn_cv_CONFIGURED_NM_FOR_TARGET%g +s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_RANLIB_FOR_TARGET@%$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET%g +s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_WINDRES_FOR_TARGET@%$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET%g s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g +s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g +s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g +s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g +s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g +s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g +s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g +s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g +s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g s%@stage1_cflags@%$stage1_cflags%g -s%@WERROR@%$WERROR%g +s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g +s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g +s%@stage2_werror_flag@%$stage2_werror_flag%g CEOF EOF |