This commit was manufactured by cvs2svn to create tag 'cgen-cgen-snapshot-20090901

snapshot-20090901'.

Sprout from binutils-2_20-branch 2009-09-04 04:29:41 UTC cvs2svn 'This commit was manufactured by cvs2svn to create branch 'binutils-'
Cherrypick from master 2009-09-01 13:38:26 UTC Tristan Gingold <gingold@adacore.com> '2009-09-01  Tristan Gingold  <gingold@adacore.com>':
    ChangeLog
    Makefile.def
    Makefile.in
    Makefile.tpl
    configure
    configure.ac
Delete:
    include/COPYING
    include/COPYING3
    include/ChangeLog
    include/ChangeLog-9103
    include/MAINTAINERS
    include/alloca-conf.h
    include/ansidecl.h
    include/aout/ChangeLog
    include/aout/adobe.h
    include/aout/aout64.h
    include/aout/ar.h
    include/aout/dynix3.h
    include/aout/encap.h
    include/aout/host.h
    include/aout/hp.h
    include/aout/hp300hpux.h
    include/aout/hppa.h
    include/aout/ranlib.h
    include/aout/reloc.h
    include/aout/stab.def
    include/aout/stab_gnu.h
    include/aout/sun4.h
    include/bfdlink.h
    include/binary-io.h
    include/bout.h
    include/coff/ChangeLog
    include/coff/ChangeLog-9103
    include/coff/alpha.h
    include/coff/apollo.h
    include/coff/arm.h
    include/coff/aux-coff.h
    include/coff/ecoff.h
    include/coff/external.h
    include/coff/go32exe.h
    include/coff/h8300.h
    include/coff/h8500.h
    include/coff/i386.h
    include/coff/i860.h
    include/coff/i960.h
    include/coff/ia64.h
    include/coff/internal.h
    include/coff/m68k.h
    include/coff/m88k.h
    include/coff/maxq.h
    include/coff/mcore.h
    include/coff/mips.h
    include/coff/mipspe.h
    include/coff/or32.h
    include/coff/pe.h
    include/coff/powerpc.h
    include/coff/rs6000.h
    include/coff/rs6k64.h
    include/coff/sh.h
    include/coff/sparc.h
    include/coff/sym.h
    include/coff/symconst.h
    include/coff/ti.h
    include/coff/tic30.h
    include/coff/tic4x.h
    include/coff/tic54x.h
    include/coff/tic80.h
    include/coff/w65.h
    include/coff/we32k.h
    include/coff/x86_64.h
    include/coff/xcoff.h
    include/coff/z80.h
    include/coff/z8k.h
    include/demangle.h
    include/dis-asm.h
    include/dwarf2.h
    include/dyn-string.h
    include/elf/ChangeLog
    include/elf/ChangeLog-9103
    include/elf/alpha.h
    include/elf/arc.h
    include/elf/arm.h
    include/elf/avr.h
    include/elf/bfin.h
    include/elf/common.h
    include/elf/cr16.h
    include/elf/cr16c.h
    include/elf/cris.h
    include/elf/crx.h
    include/elf/d10v.h
    include/elf/d30v.h
    include/elf/dlx.h
    include/elf/dwarf.h
    include/elf/external.h
    include/elf/fr30.h
    include/elf/frv.h
    include/elf/h8.h
    include/elf/hppa.h
    include/elf/i370.h
    include/elf/i386.h
    include/elf/i860.h
    include/elf/i960.h
    include/elf/ia64.h
    include/elf/internal.h
    include/elf/ip2k.h
    include/elf/iq2000.h
    include/elf/lm32.h
    include/elf/m32c.h
    include/elf/m32r.h
    include/elf/m68hc11.h
    include/elf/m68k.h
    include/elf/mcore.h
    include/elf/mep.h
    include/elf/microblaze.h
    include/elf/mips.h
    include/elf/mmix.h
    include/elf/mn10200.h
    include/elf/mn10300.h
    include/elf/moxie.h
    include/elf/msp430.h
    include/elf/mt.h
    include/elf/openrisc.h
    include/elf/or32.h
    include/elf/pj.h
    include/elf/ppc.h
    include/elf/ppc64.h
    include/elf/reloc-macros.h
    include/elf/s390.h
    include/elf/score.h
    include/elf/sh.h
    include/elf/sparc.h
    include/elf/spu.h
    include/elf/v850.h
    include/elf/vax.h
    include/elf/vxworks.h
    include/elf/x86-64.h
    include/elf/xc16x.h
    include/elf/xstormy16.h
    include/elf/xtensa.h
    include/fibheap.h
    include/filenames.h
    include/floatformat.h
    include/fnmatch.h
    include/fopen-bin.h
    include/fopen-same.h
    include/fopen-vms.h
    include/gdb/ChangeLog
    include/gdb/callback.h
    include/gdb/fileio.h
    include/gdb/remote-sim.h
    include/gdb/signals.h
    include/gdb/sim-arm.h
    include/gdb/sim-cr16.h
    include/gdb/sim-d10v.h
    include/gdb/sim-frv.h
    include/gdb/sim-h8300.h
    include/gdb/sim-lm32.h
    include/gdb/sim-m32c.h
    include/gdb/sim-ppc.h
    include/gdb/sim-sh.h
    include/gdbm.h
    include/getopt.h
    include/hashtab.h
    include/hp-symtab.h
    include/ieee.h
    include/libiberty.h
    include/md5.h
    include/nlm/ChangeLog
    include/nlm/alpha-ext.h
    include/nlm/common.h
    include/nlm/external.h
    include/nlm/i386-ext.h
    include/nlm/internal.h
    include/nlm/ppc-ext.h
    include/nlm/sparc32-ext.h
    include/oasys.h
    include/objalloc.h
    include/obstack.h
    include/opcode/ChangeLog
    include/opcode/ChangeLog-9103
    include/opcode/alpha.h
    include/opcode/arc.h
    include/opcode/arm.h
    include/opcode/avr.h
    include/opcode/bfin.h
    include/opcode/cgen-bitset.h
    include/opcode/cgen.h
    include/opcode/convex.h
    include/opcode/cr16.h
    include/opcode/cris.h
    include/opcode/crx.h
    include/opcode/d10v.h
    include/opcode/d30v.h
    include/opcode/dlx.h
    include/opcode/h8300.h
    include/opcode/hppa.h
    include/opcode/i370.h
    include/opcode/i386.h
    include/opcode/i860.h
    include/opcode/i960.h
    include/opcode/ia64.h
    include/opcode/m68hc11.h
    include/opcode/m68k.h
    include/opcode/m88k.h
    include/opcode/maxq.h
    include/opcode/mips.h
    include/opcode/mmix.h
    include/opcode/mn10200.h
    include/opcode/mn10300.h
    include/opcode/moxie.h
    include/opcode/msp430.h
    include/opcode/np1.h
    include/opcode/ns32k.h
    include/opcode/or32.h
    include/opcode/pdp11.h
    include/opcode/pj.h
    include/opcode/pn.h
    include/opcode/ppc.h
    include/opcode/pyr.h
    include/opcode/s390.h
    include/opcode/score-datadep.h
    include/opcode/score-inst.h
    include/opcode/sparc.h
    include/opcode/spu-insns.h
    include/opcode/spu.h
    include/opcode/tahoe.h
    include/opcode/tic30.h
    include/opcode/tic4x.h
    include/opcode/tic54x.h
    include/opcode/tic80.h
    include/opcode/v850.h
    include/opcode/vax.h
    include/os9k.h
    include/partition.h
    include/plugin-api.h
    include/progress.h
    include/safe-ctype.h
    include/sha1.h
    include/sort.h
    include/splay-tree.h
    include/symcat.h
    include/xregex.h
    include/xregex2.h
    include/xtensa-config.h
    include/xtensa-isa-internal.h
    include/xtensa-isa.h
    texinfo/texinfo.tex

1 files changed, 0 insertions, 235 deletions

diff --git a/include/gdb/signals.h b/include/gdb/signals.h
deleted file mode 100644
index 1074294ba..000000000
--- a/include/gdb/signals.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/* Target signal numbers for GDB and the GDB remote protocol.
-   Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
-   1998, 1999, 2000, 2001, 2002, 2007, 2008, 2009
-   Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-#ifndef GDB_SIGNALS_H
-#define GDB_SIGNALS_H
-
-/* The numbering of these signals is chosen to match traditional unix
-   signals (insofar as various unices use the same numbers, anyway).
-   It is also the numbering of the GDB remote protocol.  Other remote
-   protocols, if they use a different numbering, should make sure to
-   translate appropriately.
-
-   Since these numbers have actually made it out into other software
-   (stubs, etc.), you mustn't disturb the assigned numbering.  If you
-   need to add new signals here, add them to the end of the explicitly
-   numbered signals, at the comment marker.  Add them unconditionally,
-   not within any #if or #ifdef.
-
-   This is based strongly on Unix/POSIX signals for several reasons:
-   (1) This set of signals represents a widely-accepted attempt to
-   represent events of this sort in a portable fashion, (2) we want a
-   signal to make it from wait to child_wait to the user intact, (3) many
-   remote protocols use a similar encoding.  However, it is
-   recognized that this set of signals has limitations (such as not
-   distinguishing between various kinds of SIGSEGV, or not
-   distinguishing hitting a breakpoint from finishing a single step).
-   So in the future we may get around this either by adding additional
-   signals for breakpoint, single-step, etc., or by adding signal
-   codes; the latter seems more in the spirit of what BSD, System V,
-   etc. are doing to address these issues.  */
-
-/* For an explanation of what each signal means, see
-   target_signal_to_string.  */
-
-enum target_signal
-  {
-    /* Used some places (e.g. stop_signal) to record the concept that
-       there is no signal.  */
-    TARGET_SIGNAL_0 = 0,
-    TARGET_SIGNAL_FIRST = 0,
-    TARGET_SIGNAL_HUP = 1,
-    TARGET_SIGNAL_INT = 2,
-    TARGET_SIGNAL_QUIT = 3,
-    TARGET_SIGNAL_ILL = 4,
-    TARGET_SIGNAL_TRAP = 5,
-    TARGET_SIGNAL_ABRT = 6,
-    TARGET_SIGNAL_EMT = 7,
-    TARGET_SIGNAL_FPE = 8,
-    TARGET_SIGNAL_KILL = 9,
-    TARGET_SIGNAL_BUS = 10,
-    TARGET_SIGNAL_SEGV = 11,
-    TARGET_SIGNAL_SYS = 12,
-    TARGET_SIGNAL_PIPE = 13,
-    TARGET_SIGNAL_ALRM = 14,
-    TARGET_SIGNAL_TERM = 15,
-    TARGET_SIGNAL_URG = 16,
-    TARGET_SIGNAL_STOP = 17,
-    TARGET_SIGNAL_TSTP = 18,
-    TARGET_SIGNAL_CONT = 19,
-    TARGET_SIGNAL_CHLD = 20,
-    TARGET_SIGNAL_TTIN = 21,
-    TARGET_SIGNAL_TTOU = 22,
-    TARGET_SIGNAL_IO = 23,
-    TARGET_SIGNAL_XCPU = 24,
-    TARGET_SIGNAL_XFSZ = 25,
-    TARGET_SIGNAL_VTALRM = 26,
-    TARGET_SIGNAL_PROF = 27,
-    TARGET_SIGNAL_WINCH = 28,
-    TARGET_SIGNAL_LOST = 29,
-    TARGET_SIGNAL_USR1 = 30,
-    TARGET_SIGNAL_USR2 = 31,
-    TARGET_SIGNAL_PWR = 32,
-    /* Similar to SIGIO.  Perhaps they should have the same number.  */
-    TARGET_SIGNAL_POLL = 33,
-    TARGET_SIGNAL_WIND = 34,
-    TARGET_SIGNAL_PHONE = 35,
-    TARGET_SIGNAL_WAITING = 36,
-    TARGET_SIGNAL_LWP = 37,
-    TARGET_SIGNAL_DANGER = 38,
-    TARGET_SIGNAL_GRANT = 39,
-    TARGET_SIGNAL_RETRACT = 40,
-    TARGET_SIGNAL_MSG = 41,
-    TARGET_SIGNAL_SOUND = 42,
-    TARGET_SIGNAL_SAK = 43,
-    TARGET_SIGNAL_PRIO = 44,
-    TARGET_SIGNAL_REALTIME_33 = 45,
-    TARGET_SIGNAL_REALTIME_34 = 46,
-    TARGET_SIGNAL_REALTIME_35 = 47,
-    TARGET_SIGNAL_REALTIME_36 = 48,
-    TARGET_SIGNAL_REALTIME_37 = 49,
-    TARGET_SIGNAL_REALTIME_38 = 50,
-    TARGET_SIGNAL_REALTIME_39 = 51,
-    TARGET_SIGNAL_REALTIME_40 = 52,
-    TARGET_SIGNAL_REALTIME_41 = 53,
-    TARGET_SIGNAL_REALTIME_42 = 54,
-    TARGET_SIGNAL_REALTIME_43 = 55,
-    TARGET_SIGNAL_REALTIME_44 = 56,
-    TARGET_SIGNAL_REALTIME_45 = 57,
-    TARGET_SIGNAL_REALTIME_46 = 58,
-    TARGET_SIGNAL_REALTIME_47 = 59,
-    TARGET_SIGNAL_REALTIME_48 = 60,
-    TARGET_SIGNAL_REALTIME_49 = 61,
-    TARGET_SIGNAL_REALTIME_50 = 62,
-    TARGET_SIGNAL_REALTIME_51 = 63,
-    TARGET_SIGNAL_REALTIME_52 = 64,
-    TARGET_SIGNAL_REALTIME_53 = 65,
-    TARGET_SIGNAL_REALTIME_54 = 66,
-    TARGET_SIGNAL_REALTIME_55 = 67,
-    TARGET_SIGNAL_REALTIME_56 = 68,
-    TARGET_SIGNAL_REALTIME_57 = 69,
-    TARGET_SIGNAL_REALTIME_58 = 70,
-    TARGET_SIGNAL_REALTIME_59 = 71,
-    TARGET_SIGNAL_REALTIME_60 = 72,
-    TARGET_SIGNAL_REALTIME_61 = 73,
-    TARGET_SIGNAL_REALTIME_62 = 74,
-    TARGET_SIGNAL_REALTIME_63 = 75,
-
-    /* Used internally by Solaris threads.  See signal(5) on Solaris.  */
-    TARGET_SIGNAL_CANCEL = 76,
-
-    /* Yes, this pains me, too.  But LynxOS didn't have SIG32, and now
-       GNU/Linux does, and we can't disturb the numbering, since it's
-       part of the remote protocol.  Note that in some GDB's
-       TARGET_SIGNAL_REALTIME_32 is number 76.  */
-    TARGET_SIGNAL_REALTIME_32,
-    /* Yet another pain, IRIX 6 has SIG64. */
-    TARGET_SIGNAL_REALTIME_64,
-    /* Yet another pain, GNU/Linux MIPS might go up to 128. */
-    TARGET_SIGNAL_REALTIME_65,
-    TARGET_SIGNAL_REALTIME_66,
-    TARGET_SIGNAL_REALTIME_67,
-    TARGET_SIGNAL_REALTIME_68,
-    TARGET_SIGNAL_REALTIME_69,
-    TARGET_SIGNAL_REALTIME_70,
-    TARGET_SIGNAL_REALTIME_71,
-    TARGET_SIGNAL_REALTIME_72,
-    TARGET_SIGNAL_REALTIME_73,
-    TARGET_SIGNAL_REALTIME_74,
-    TARGET_SIGNAL_REALTIME_75,
-    TARGET_SIGNAL_REALTIME_76,
-    TARGET_SIGNAL_REALTIME_77,
-    TARGET_SIGNAL_REALTIME_78,
-    TARGET_SIGNAL_REALTIME_79,
-    TARGET_SIGNAL_REALTIME_80,
-    TARGET_SIGNAL_REALTIME_81,
-    TARGET_SIGNAL_REALTIME_82,
-    TARGET_SIGNAL_REALTIME_83,
-    TARGET_SIGNAL_REALTIME_84,
-    TARGET_SIGNAL_REALTIME_85,
-    TARGET_SIGNAL_REALTIME_86,
-    TARGET_SIGNAL_REALTIME_87,
-    TARGET_SIGNAL_REALTIME_88,
-    TARGET_SIGNAL_REALTIME_89,
-    TARGET_SIGNAL_REALTIME_90,
-    TARGET_SIGNAL_REALTIME_91,
-    TARGET_SIGNAL_REALTIME_92,
-    TARGET_SIGNAL_REALTIME_93,
-    TARGET_SIGNAL_REALTIME_94,
-    TARGET_SIGNAL_REALTIME_95,
-    TARGET_SIGNAL_REALTIME_96,
-    TARGET_SIGNAL_REALTIME_97,
-    TARGET_SIGNAL_REALTIME_98,
-    TARGET_SIGNAL_REALTIME_99,
-    TARGET_SIGNAL_REALTIME_100,
-    TARGET_SIGNAL_REALTIME_101,
-    TARGET_SIGNAL_REALTIME_102,
-    TARGET_SIGNAL_REALTIME_103,
-    TARGET_SIGNAL_REALTIME_104,
-    TARGET_SIGNAL_REALTIME_105,
-    TARGET_SIGNAL_REALTIME_106,
-    TARGET_SIGNAL_REALTIME_107,
-    TARGET_SIGNAL_REALTIME_108,
-    TARGET_SIGNAL_REALTIME_109,
-    TARGET_SIGNAL_REALTIME_110,
-    TARGET_SIGNAL_REALTIME_111,
-    TARGET_SIGNAL_REALTIME_112,
-    TARGET_SIGNAL_REALTIME_113,
-    TARGET_SIGNAL_REALTIME_114,
-    TARGET_SIGNAL_REALTIME_115,
-    TARGET_SIGNAL_REALTIME_116,
-    TARGET_SIGNAL_REALTIME_117,
-    TARGET_SIGNAL_REALTIME_118,
-    TARGET_SIGNAL_REALTIME_119,
-    TARGET_SIGNAL_REALTIME_120,
-    TARGET_SIGNAL_REALTIME_121,
-    TARGET_SIGNAL_REALTIME_122,
-    TARGET_SIGNAL_REALTIME_123,
-    TARGET_SIGNAL_REALTIME_124,
-    TARGET_SIGNAL_REALTIME_125,
-    TARGET_SIGNAL_REALTIME_126,
-    TARGET_SIGNAL_REALTIME_127,
-
-    TARGET_SIGNAL_INFO,
-
-    /* Some signal we don't know about.  */
-    TARGET_SIGNAL_UNKNOWN,
-
-    /* Use whatever signal we use when one is not specifically specified
-       (for passing to proceed and so on).  */
-    TARGET_SIGNAL_DEFAULT,
-
-    /* Mach exceptions.  In versions of GDB before 5.2, these were just before
-       TARGET_SIGNAL_INFO if you were compiling on a Mach host (and missing
-       otherwise).  */
-    TARGET_EXC_BAD_ACCESS,
-    TARGET_EXC_BAD_INSTRUCTION,
-    TARGET_EXC_ARITHMETIC,
-    TARGET_EXC_EMULATION,
-    TARGET_EXC_SOFTWARE,
-    TARGET_EXC_BREAKPOINT,
-
-    /* If you are adding a new signal, add it just above this comment.  */
-
-    /* Last and unused enum value, for sizing arrays, etc.  */
-    TARGET_SIGNAL_LAST
-  };
-
-#endif /* #ifndef GDB_SIGNALS_H */