diff options
Diffstat (limited to 'rsyslog.h')
| -rw-r--r-- | rsyslog.h | 129 |
1 files changed, 122 insertions, 7 deletions
@@ -2,6 +2,25 @@ * rsyslog project (including all subprojects like * rfc3195d). * Begun 2005-09-15 RGerhards + * + * Copyright (C) 2005 by Rainer Gerhards and Adiscon GmbH + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. */ #ifndef INCLUDED_RSYSLOG_H #define INCLUDED_RSYSLOG_H @@ -24,6 +43,27 @@ # define _FILE_OFFSET_BITS 64 #endif + +/* some universal 64 bit define... */ +typedef long long int64; +typedef long long unsigned uint64; +typedef int64 number_t; /* type to use for numbers - TODO: maybe an autoconf option? */ + +#ifdef __hpux +typedef unsigned int u_int32_t; /* TODO: is this correct? */ +typedef int socklen_t; +#endif + +/* settings for flow control + * TODO: is there a better place for them? -- rgerhards, 2008-03-14 + */ +typedef enum { + eFLOWCTL_NO_DELAY = 0, /**< UDP and other non-delayable sources */ + eFLOWCTL_LIGHT_DELAY = 1, /**< some light delay possible, but no extended period of time */ + eFLOWCTL_FULL_DELAY = 2 /**< delay possible for extended period of time */ +} flowControl_t; + + /* The error codes below are orginally "borrowed" from * liblogging. As such, we reserve values up to -2999 * just in case we need to borrow something more ;) @@ -33,8 +73,9 @@ enum rsRetVal_ /** return value. All methods return this if not specified oth RS_RET_NOT_IMPLEMENTED = -7, /**< implementation is missing (probably internal error or lazyness ;)) */ RS_RET_OUT_OF_MEMORY = -6, /**< memory allocation failed */ RS_RET_PROVIDED_BUFFER_TOO_SMALL = -50,/**< the caller provided a buffer, but the called function sees the size of this buffer is too small - operation not carried out */ - RS_RET_TRUE = -1, - RS_RET_FALSE = -2, + RS_RET_TRUE = -1, /**< to indicate a true state (can be used as TRUE, legacy) */ + RS_RET_FALSE = -2, /**< to indicate a false state (can be used as FALSE, legacy) */ + RS_RET_NO_IRET = -8, /**< This is a trick for the debuging system - it means no iRet is provided */ RS_RET_ERR = -3000, /**< generic failure */ RS_TRUNCAT_TOO_LARGE = -3001, /**< truncation operation where too many chars should be truncated */ RS_RET_FOUND_AT_STRING_END = -3002, /**< some value found, but at the last pos of string */ @@ -46,6 +87,14 @@ enum rsRetVal_ /** return value. All methods return this if not specified oth RS_RET_OBJ_CREATION_FAILED = - 3008, /**< the creation of an object failed (no details available) */ RS_RET_PARAM_ERROR = -1000, /**< invalid parameter in call to function */ RS_RET_MISSING_INTERFACE = -1001,/**< interface version mismatch, required missing */ + RS_RET_INVALID_CORE_INTERFACE = -1002,/**< interface provided by host invalid, can not be used */ + RS_RET_ENTRY_POINT_NOT_FOUND = -1003,/**< a requested entry point was not found */ + RS_RET_MODULE_ENTRY_POINT_NOT_FOUND = -1004,/**< a entry point requested from a module was not present in it */ + RS_RET_OBJ_NOT_AVAILABLE = -1005,/**< something could not be completed because the required object is not available*/ + RS_RET_LOAD_ERROR = -1006,/**< we had an error loading the object/interface and can not continue */ + RS_RET_MODULE_STILL_REFERENCED = -1007,/**< module could not be unloaded because it still is referenced by someone */ + RS_RET_OBJ_UNKNOWN = -1008,/**< object is unknown where required */ + RS_RET_OBJ_NOT_REGISTERED = -1009,/**< tried to unregister an object that is not registered */ /* return states for config file processing */ RS_RET_NONE = -2000, /**< some value is not available - not necessarily an error */ RS_RET_CONFLINE_UNPROCESSED = -2001,/**< config line was not processed, pass to other module */ @@ -69,11 +118,68 @@ enum rsRetVal_ /** return value. All methods return this if not specified oth RS_RET_INVALID_SOURCE = -2019, /**< source (address) invalid for some reason */ RS_RET_ADDRESS_UNKNOWN = -2020, /**< an address is unknown - not necessarily an error */ RS_RET_MALICIOUS_ENTITY = -2021, /**< there is an malicious entity involved */ + RS_RET_NO_KERNEL_LOGSRC = -2022, /**< no source for kernel logs can be obtained */ RS_RET_TCP_SEND_ERROR = -2023, /**< error during TCP send process */ RS_RET_GSS_SEND_ERROR = -2024, /**< error during GSS (via TCP) send process */ RS_RET_TCP_SOCKCREATE_ERR = -2025, /**< error during creation of TCP socket */ RS_RET_GSS_SENDINIT_ERROR = -2024, /**< error during GSS (via TCP) send initialization process */ + RS_RET_EOF = -2026, /**< end of file reached, not necessarily an error */ + RS_RET_IO_ERROR = -2027, /**< some kind of IO error happened */ + RS_RET_INVALID_OID = -2028, /**< invalid object ID */ + RS_RET_INVALID_HEADER = -2029, /**< invalid header */ + RS_RET_INVALID_HEADER_VERS = -2030, /**< invalid header version */ + RS_RET_INVALID_DELIMITER = -2031, /**< invalid delimiter, e.g. between params */ + RS_RET_INVALID_PROPFRAME = -2032, /**< invalid framing in serialized property */ + RS_RET_NO_PROPLINE = -2033, /**< line is not a property line */ + RS_RET_INVALID_TRAILER = -2034, /**< invalid trailer */ + RS_RET_VALUE_TOO_LOW = -2035, /**< a provided value is too low */ + RS_RET_FILE_PREFIX_MISSING = -2036, /**< a required file prefix (parameter?) is missing */ + RS_RET_INVALID_HEADER_RECTYPE = -2037, /**< invalid record type in header or invalid header */ + RS_RET_QTYPE_MISMATCH = -2038, /**< different qType when reading back a property type */ + RS_RET_NO_FILE_ACCESS = -2039, /**< covers EACCES error on file open() */ + RS_RET_FILE_NOT_FOUND = -2040, /**< file not found */ + RS_RET_TIMED_OUT = -2041, /**< timeout occured (not necessarily an error) */ + RS_RET_QSIZE_ZERO = -2042, /**< queue size is zero where this is not supported */ + RS_RET_ALREADY_STARTING = -2043, /**< something (a thread?) is already starting - not necessarily an error */ + RS_RET_NO_MORE_THREADS = -2044, /**< no more threads available, not necessarily an error */ + RS_RET_NO_FILEPREFIX = -2045, /**< file prefix is not specified where one is needed */ + RS_RET_CONFIG_ERROR = -2046, /**< there is a problem with the user-provided config settigs */ + RS_RET_OUT_OF_DESRIPTORS = -2047, /**< a descriptor table's space has been exhausted */ + RS_RET_NO_DRIVERS = -2048, /**< a required drivers missing */ + RS_RET_NO_DRIVERNAME = -2049, /**< driver name missing where one was required */ + RS_RET_EOS = -2050, /**< end of stream (of whatever) */ + RS_RET_SYNTAX_ERROR = -2051, /**< syntax error, eg. during parsing */ + RS_RET_INVALID_OCTAL_DIGIT = -2052, /**< invalid octal digit during parsing */ + RS_RET_INVALID_HEX_DIGIT = -2053, /**< invalid hex digit during parsing */ + RS_RET_INTERFACE_NOT_SUPPORTED = -2054, /**< interface not supported */ + RS_RET_OUT_OF_STACKSPACE = -2055, /**< a stack data structure is exhausted and can not be grown */ + RS_RET_STACK_EMPTY = -2056, /**< a pop was requested on a stack, but the stack was already empty */ + RS_RET_INVALID_VMOP = -2057, /**< invalid virtual machine instruction */ + RS_RET_INVALID_VAR = -2058, /**< a var_t or its content is unsuitable, eg. VARTYPE_NONE */ + RS_RET_INVALID_NUMBER = -2059, /**< number invalid during parsing */ + RS_RET_NOT_A_NUMBER = -2060, /**< e.g. conversion impossible because the string is not a number */ + RS_RET_OBJ_ALREADY_REGISTERED = -2061, /**< object (name) is already registered */ + RS_RET_OBJ_REGISTRY_OUT_OF_SPACE = -2062, /**< the object registry has run out of space */ + RS_RET_HOST_NOT_PERMITTED = -2063, /**< a host is not permitted to perform an action it requested */ + RS_RET_MODULE_LOAD_ERR = -2064, /**< module could not be loaded */ + RS_RET_MODULE_LOAD_ERR_PATHLEN = -2065, /**< module could not be loaded - path to long */ + RS_RET_MODULE_LOAD_ERR_DLOPEN = -2066, /**< module could not be loaded - problem in dlopen() */ + RS_RET_MODULE_LOAD_ERR_NO_INIT = -2067, /**< module could not be loaded - init() missing */ + RS_RET_MODULE_LOAD_ERR_INIT_FAILED = -2068, /**< module could not be loaded - init() failed */ + RS_RET_NO_SOCKET = -2069, /**< socket could not be obtained or was not provided */ + RS_RET_SMTP_ERROR = -2070, /**< error during SMTP transation */ + RS_RET_MAIL_NO_TO = -2071, /**< recipient for mail destination is missing */ + RS_RET_MAIL_NO_FROM = -2072, /**< sender for mail destination is missing */ + RS_RET_INVALID_PRI = -2073, /**< PRI value is invalid */ + RS_RET_QUEUE_FULL = -2074, /**< queue is full, operation could not be completed */ + + /* RainerScript error messages (range 1000.. 1999) */ + RS_RET_SYSVAR_NOT_FOUND = 1001, /**< system variable could not be found (maybe misspelled) */ + + /* some generic error/status codes */ RS_RET_OK_DELETE_LISTENTRY = 1, /**< operation successful, but callee requested the deletion of an entry (special state) */ + RS_RET_TERMINATE_NOW = 2, /**< operation successful, function is requested to terminate (mostly used with threads) */ + RS_RET_NO_RUN = 3, /**< operation successful, but function does not like to be executed */ RS_RET_OK = 0 /**< operation successful */ }; typedef enum rsRetVal_ rsRetVal; /**< friendly type for global return value */ @@ -85,9 +191,13 @@ typedef enum rsRetVal_ rsRetVal; /**< friendly type for global return value */ #define CHKiRet(code) if((iRet = code) != RS_RET_OK) goto finalize_it /* macro below is to be used if we need our own handling, eg for cleanup */ #define CHKiRet_Hdlr(code) if((iRet = code) != RS_RET_OK) +/* macro below is to handle failing malloc/calloc/strdup... which we almost always handle in the same way... */ +#define CHKmalloc(operation) if((operation) == NULL) ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY) /* macro below is used in conjunction with CHKiRet_Hdlr, else use ABORT_FINALIZE */ #define FINALIZE goto finalize_it; -#define DEFiRet rsRetVal iRet = RS_RET_OK +#define DEFiRet BEGINfunc rsRetVal iRet = RS_RET_OK +#define RETiRet do{ ENDfuncIRet return iRet; }while(0) + #define ABORT_FINALIZE(errCode) \ do { \ iRet = errCode; \ @@ -108,13 +218,13 @@ enum rsObjectID * invalid object pointer! */ OIDrsInvalid = 0, /**< value created by calloc(), so do not use ;) */ - /* The 0xEFCD is a debug aid. It helps us find object IDs in memory - * dumps (on X86, this is CDEF in the dump ;) + /* The 0x3412 is a debug aid. It helps us find object IDs in memory + * dumps (on X86, this is 1234 in the dump ;) * If you are on an embedded device and you would like to save space * make them 1 byte only. */ - OIDrsCStr = 0xEFCD0001, - OIDrsPars = 0xEFCD0002 + OIDrsCStr = 0x34120001, + OIDrsPars = 0x34120002 }; typedef enum rsObjectID rsObjID; @@ -149,6 +259,11 @@ typedef unsigned char uchar; # define __attribute__(x) /*NOTHING*/ #endif +/* The following prototype is convenient, even though it may not be the 100% correct place.. -- rgerhards 2008-01-07 */ +void dbgprintf(char *, ...) __attribute__((format(printf, 1, 2))); + +#include "debug.h" + #endif /* multi-include protection */ /* * vi:set ai: |