diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 110 |
1 files changed, 19 insertions, 91 deletions
diff --git a/Makefile.in b/Makefile.in index 72bd8b078..c3caa1d0c 100644 --- a/Makefile.in +++ b/Makefile.in @@ -90,8 +90,8 @@ CC = cc # Special variables passed down in EXTRA_GCC_FLAGS. They are defined # here so that they can be overridden by Makefile fragments. HOST_CC = $(CC_FOR_BUILD) -HOST_PREFIX = -HOST_PREFIX_1 = loser- +BUILD_PREFIX = +BUILD_PREFIX_1 = loser- # These flag values are normally overridden by the configure script. CFLAGS = -g @@ -100,7 +100,11 @@ CXXFLAGS = -g -O2 LDFLAGS = LIBCFLAGS = $(CFLAGS) CFLAGS_FOR_BUILD = $(CFLAGS) -CFLAGS_FOR_TARGET = $(CFLAGS) +# During gcc bootstrap, if we use some random cc for stage1 then +# CFLAGS will be just -g. We want to ensure that TARGET libraries +# (which we know are built with gcc) are built with optimizations so +# prepend -O2 when setting CFLAGS_FOR_TARGET. +CFLAGS_FOR_TARGET = -O2 $(CFLAGS) LDFLAGS_FOR_TARGET = LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) PICFLAG = @@ -182,7 +186,7 @@ OTHERS = # This is set by the configure script to the list of directories which # should be built using the target tools. -TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libobjc +TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib winsup opcodes libf2c libobjc # Target libraries are put under this directory: # Changed by configure to $(target_alias) if cross. @@ -486,8 +490,8 @@ EXTRA_GCC_FLAGS = \ 'CXX=$(CXX)' \ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ 'HOST_CC=$(CC_FOR_BUILD)' \ - 'HOST_PREFIX=$(HOST_PREFIX)' \ - 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \ + 'BUILD_PREFIX=$(BUILD_PREFIX)' \ + 'BUILD_PREFIX_1=$(BUILD_PREFIX_1)' \ 'NM=$(NM)' \ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \ 'WINDRES=$$(WINDRES_FOR_TARGET)' \ @@ -496,7 +500,6 @@ EXTRA_GCC_FLAGS = \ "`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \ - "`echo 'LIBGCC1_TEST=$(LIBGCC1_TEST)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \ @@ -521,7 +524,6 @@ CONFIGURE_BUILD_MODULES = \ # This is a list of the targets for all of the modules which are compiled # using $(FLAGS_TO_PASS). ALL_MODULES = \ - all-apache \ all-ash \ all-autoconf \ all-automake \ @@ -531,8 +533,6 @@ ALL_MODULES = \ all-bison \ all-byacc \ all-bzip2 \ - all-cgen \ - all-cvssrc \ all-db \ all-dejagnu \ all-diff \ @@ -549,13 +549,10 @@ ALL_MODULES = \ all-gnuserv \ all-gprof \ all-grep \ - all-grez \ all-gzip \ all-hello \ all-indent \ - all-inet \ all-intl \ - all-ispell \ all-itcl \ all-ld \ all-libgui \ @@ -580,10 +577,8 @@ ALL_MODULES = \ all-snavigator \ all-tar \ all-tcl \ - all-tcl8.1 \ all-texinfo \ all-textutils \ - all-tgas \ all-time \ all-uudecode \ all-wdiff \ @@ -605,7 +600,6 @@ NATIVE_CHECK_MODULES = \ check-zip CROSS_CHECK_MODULES = \ - check-apache \ check-ash \ check-autoconf \ check-automake \ @@ -613,8 +607,6 @@ CROSS_CHECK_MODULES = \ check-bfd \ check-binutils \ check-bzip2 \ - check-cgen \ - check-cvssrc \ check-db \ check-dejagnu \ check-diff \ @@ -631,9 +623,7 @@ CROSS_CHECK_MODULES = \ check-gzip \ check-hello \ check-indent \ - check-inet \ check-intl \ - check-ispell \ check-itcl \ check-ld \ check-libgui \ @@ -659,7 +649,6 @@ CROSS_CHECK_MODULES = \ check-tcl \ check-texinfo \ check-textutils \ - check-tgas \ check-time \ check-uudecode \ check-wdiff \ @@ -675,7 +664,6 @@ CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) # We put install-tcl before install-itcl because itcl wants to run a # program on installation which uses the Tcl libraries. INSTALL_MODULES = \ - install-apache \ install-ash \ install-autoconf \ install-automake \ @@ -686,8 +674,6 @@ INSTALL_MODULES = \ install-binutils \ install-bison \ install-byacc \ - install-cgen \ - install-cvssrc \ install-db \ install-dejagnu \ install-diff \ @@ -704,15 +690,11 @@ INSTALL_MODULES = \ install-gnuserv \ install-gprof \ install-grep \ - install-grez \ install-gzip \ install-hello \ install-indent \ - install-inet \ install-intl \ - install-ispell \ install-tcl \ - install-tcl8.1 \ install-itcl \ install-ld \ install-libgui \ @@ -735,7 +717,6 @@ INSTALL_MODULES = \ install-snavigator \ install-tar \ install-textutils \ - install-tgas \ install-time \ install-uudecode \ install-wdiff \ @@ -745,20 +726,16 @@ INSTALL_MODULES = \ # This is a list of the targets for all of the modules which are compiled # using $(X11_FLAGS_TO_PASS). ALL_X11_MODULES = \ - all-emacs \ - all-emacs19 \ all-gdb \ all-expect \ all-guile \ all-tclX \ all-tk \ - all-tk8.1 \ all-tix # This is a list of the check targets for all of the modules which are # compiled using $(X11_FLAGS_TO_PASS). CHECK_X11_MODULES = \ - check-emacs \ check-gdb \ check-guile \ check-expect \ @@ -769,21 +746,17 @@ CHECK_X11_MODULES = \ # This is a list of the install targets for all the modules which are # compiled using $(X11_FLAGS_TO_PASS). INSTALL_X11_MODULES = \ - install-emacs \ - install-emacs19 \ install-gdb \ install-guile \ install-expect \ install-tclX \ install-tk \ - install-tk8.1 \ install-tix # This is a list of the targets for all of the modules which are compiled # using $(TARGET_FLAGS_TO_PASS). ALL_TARGET_MODULES = \ all-target-libstdc++-v3 \ - all-target-librx \ all-target-newlib \ all-target-libf2c \ all-target-libobjc \ @@ -793,20 +766,16 @@ ALL_TARGET_MODULES = \ all-target-libiberty \ all-target-gperf \ all-target-examples \ - all-target-libstub \ all-target-libffi \ all-target-libjava \ all-target-zlib \ all-target-boehm-gc \ - all-target-qthreads \ - all-target-bsp \ - all-target-cygmon + all-target-qthreads # This is a list of the configure targets for all of the modules which # are compiled using the target tools. CONFIGURE_TARGET_MODULES = \ configure-target-libstdc++-v3 \ - configure-target-librx \ configure-target-newlib \ configure-target-libf2c \ configure-target-libobjc \ @@ -816,14 +785,11 @@ CONFIGURE_TARGET_MODULES = \ configure-target-libiberty \ configure-target-gperf \ configure-target-examples \ - configure-target-libstub \ configure-target-libffi \ configure-target-libjava \ configure-target-zlib \ configure-target-boehm-gc \ - configure-target-qthreads \ - configure-target-bsp \ - configure-target-cygmon + configure-target-qthreads # This is a list of the check targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). @@ -852,7 +818,6 @@ INSTALL_TARGET_MODULES = \ install-target-winsup \ install-target-libgloss \ install-target-libiberty \ - install-target-bsp \ install-target-libjava \ install-target-zlib \ install-target-boehm-gc \ @@ -861,7 +826,6 @@ INSTALL_TARGET_MODULES = \ # This is a list of the targets for which we can do a clean-{target}. CLEAN_MODULES = \ - clean-apache \ clean-ash \ clean-autoconf \ clean-automake \ @@ -871,8 +835,6 @@ CLEAN_MODULES = \ clean-bison \ clean-byacc \ clean-bzip2 \ - clean-cgen \ - clean-cvssrc \ clean-db \ clean-dejagnu \ clean-diff \ @@ -889,13 +851,10 @@ CLEAN_MODULES = \ clean-gnuserv \ clean-gprof \ clean-grep \ - clean-grez \ clean-gzip \ clean-hello \ clean-indent \ - clean-inet \ clean-intl \ - clean-ispell \ clean-itcl \ clean-ld \ clean-libgui \ @@ -922,7 +881,6 @@ CLEAN_MODULES = \ clean-tcl \ clean-texinfo \ clean-textutils \ - clean-tgas \ clean-time \ clean-uudecode \ clean-wdiff \ @@ -932,7 +890,6 @@ CLEAN_MODULES = \ # All of the target modules that can be cleaned CLEAN_TARGET_MODULES = \ clean-target-libstdc++-v3 \ - clean-target-librx \ clean-target-newlib \ clean-target-libf2c \ clean-target-libobjc \ @@ -941,19 +898,14 @@ CLEAN_TARGET_MODULES = \ clean-target-libiberty \ clean-target-gperf \ clean-target-examples \ - clean-target-libstub \ clean-target-libffi \ clean-target-libjava \ clean-target-zlib \ clean-target-boehm-gc \ - clean-target-qthreads \ - clean-target-bsp \ - clean-target-cygmon + clean-target-qthreads # All of the x11 modules that can be cleaned CLEAN_X11_MODULES = \ - clean-emacs \ - clean-emacs19 \ clean-gdb \ clean-expect \ clean-guile \ @@ -1178,11 +1130,6 @@ install.all: install-no-fixedincludes true ; \ fi -# inet-install is used because the I*Net wants DejaGNU installed but -# not built. Similarly, gzip is built but not installed. -inet-install: - $(MAKE) INSTALL_MODULES="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install - # install-no-fixedincludes is used because Cygnus can not distribute # the fixed header files. .PHONY: install-no-fixedincludes @@ -1703,7 +1650,6 @@ ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3 # This is a list of inter-dependencies among modules. -all-apache: all-ash: all-autoconf: all-m4 all-texinfo all-automake: all-m4 all-texinfo @@ -1713,19 +1659,11 @@ all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all all-bison: all-texinfo configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads all-target-boehm-gc: configure-target-boehm-gc -configure-target-bsp: $(ALL_GCC_C) -all-target-bsp: configure-target-bsp all-byacc: all-bzip2: -all-cgen: all-libiberty -all-cvssrc: -configure-target-cygmon: $(ALL_GCC_C) -all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libstub all-target-bsp all-db: all-dejagnu: all-tcl all-expect all-tk all-diff: all-libiberty -all-emacs: -all-emacs19: all-bison all-byacc all-etc: configure-target-examples: $(ALL_GCC_C) all-target-examples: configure-target-examples @@ -1746,20 +1684,17 @@ configure-target-gperf: $(ALL_GCC_CXX) all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3 all-gprof: all-libiberty all-bfd all-opcodes all-intl all-grep: all-libiberty -all-grez: all-libiberty all-bfd all-opcodes -all-gui: all-gdb all-libproc all-target-librx +all-gui: all-gdb all-libproc all-guile: all-gzip: all-libiberty all-hello: all-libiberty all-indent: -all-inet: all-tcl all-send-pr all-perl all-intl: -all-ispell: all-emacs19 -all-itcl: all-tcl all-tk all-tcl8.1 all-tk8.1 +all-itcl: all-tcl all-tk all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl configure-target-libgloss: $(ALL_GCC) all-target-libgloss: configure-target-libgloss configure-target-newlib -all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl +all-libgui: all-tcl all-tk all-itcl all-libiberty: all-build-libiberty: configure-build-libiberty @@ -1768,12 +1703,8 @@ configure-target-libffi: $(ALL_GCC_C) all-target-libffi: configure-target-libffi configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi -configure-target-librx: $(ALL_GCC_C) -all-target-librx: configure-target-librx configure-target-libstdc++-v3: $(ALL_GCC_C) all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty -configure-target-libstub: $(ALL_GCC_C) -all-target-libstub: configure-target-libstub all-libtool: configure-target-libf2c: $(ALL_GCC_C) all-target-libf2c: configure-target-libf2c all-target-libiberty @@ -1786,7 +1717,7 @@ configure-target-newlib: $(ALL_GCC) all-target-newlib: configure-target-newlib configure-target-libtermcap: $(ALL_GCC_C) all-target-libtermcap: configure-target-libtermcap -all-opcodes: all-bfd all-libiberty all-cgen +all-opcodes: all-bfd all-libiberty all-patch: all-libiberty all-perl: all-prms: all-libiberty @@ -1799,19 +1730,16 @@ all-sed: all-libiberty all-send-pr: all-prms all-shellutils: all-sid: all-tcl all-tk -all-sim: all-libiberty all-bfd all-opcodes all-readline all-cgen +all-sim: all-libiberty all-bfd all-opcodes all-readline all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui all-tar: all-libiberty all-tcl: -all-tcl8.1: all-tclX: all-tcl all-tk all-tk: all-tcl -all-tk8.1: all-tcl8.1 all-texinfo: all-libiberty all-textutils: -all-tgas: all-libiberty all-bfd all-opcodes all-time: -all-tix: all-tcl all-tk all-tcl8.1 all-tk8.1 +all-tix: all-tcl all-tk all-wdiff: configure-target-winsup: $(ALL_GCC_C) all-target-winsup: all-target-libiberty all-target-libtermcap configure-target-winsup |